Kenwood XD755 Stereo System User Manual


 
10
EN
Remote control
When inserting or removing the batteries, push
them towards the battery terminals.
Installing the batteries incorrectly may cause the
unit to malfunction.
Precautions for battery use :
Replace all old batteries with new ones at the
same time. Do not mix old and new batteries.
Remove the batteries if the unit will not be used
for long periods of time. This will prevent poten-
tial damage due to battery leakage.
Do not use rechargeable batteries (nickel-
cadmuim battery, etc.)
Note concerning use :
Replace the batteries if the operating distance
is reduced or if the operation becomes erratic.
Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit
with a soft cloth.
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
2 “AA” size batteries (UM/SUM-3, R6,
HP-7 or similar)
30
30
Demo mode
To enter into the demonstration mode:
When the unit is in the standby mode, press the
EX.BASS/DEMO button again.
To cancel the demonstration mode :
Press the EX.BASS/DEMO button.
The demonstration mode will be cancelled and
the unit will be in the low power consumption
mode.
Notes :
When the unit is in the low power consumption
mode, the display will disappear.
When the power is on, the EX.BASS/DEMO but-
ton can be used to select the extra bass mode.
When the power supply is restored after a power
failure or the power cord is unplugged and
plugged in again during use, this unit will enter
into the demonstration mode.
EX.BASS
/
DEMO