Filter
Top Products
25
EN
ASPM
(Auto Station Programme Memory)
It is recommended that you store stations in
memory using ASPM.
(This memory can be used for PTY searches, and
station select.)
When the AUTO MEMORY button is pressed, whilst
turned to the FM band, the RDS function will auto-
matically search for new RDS stations. Up to 40
stations can be stored in memory. (If you have al-
ready stored some stations in memory, the number
of new stations you can store will be less.)
1 Press the POWER button to turn the power
on.
2 Press the TUNER (BAND) button.
3 Press the TUNER (BAND) button to select the
FM ST or FM band.
4 Press and hold down the AUTO MEMORY but-
ton for at least 3 seconds.
1 After “ASPM” has flashed for about 4 seconds,
scanning will start. (87.50 - 108.00 MHz)
2 When an RDS station is found, the RDS will ap-
pear for a short time and the station will be stored
in memory.
3 After scanning, the number of stations that have
been automatically stored in memory will be dis-
played for 4 seconds, and then “END” will ap-
pear for 4 seconds.
Notes :
•
Only RDS stations will be stored in memory in
numerical order.
• If the same station is broadcasting on different
frequencies, the transmission with the strong-
est broadcast frequency will be stored in
memory.
• Any station which has the same frequency as
one which has been already stored in memory
will not be stored again.
• The ASPM operation can be repeated until
“END” appears.
• If a 40th station is stored in memory during a
scan, the scanning will stop at that station. The
number of stations and “END” will each be dis-
played for 4 seconds.
• If no stations have been stored in memory,
“END” will appear for about 4 seconds.
1
2,3
4
4
(4 seconds)
(4 seconds)