Filter
Top Products
18
EN
Program playback
You can playback the tracks on the CDs in the disc
1-3 position in any order desired. By specifying the
disc numbers from 1 to 3, and the track numbers
from 1 to 99, you can choose up to 32 selections
for playback in the order you like.
1 When in the stop mode, use the disc number
buttons (DISC 1 - DISC 3) to select the desired
disc number.
2 Press the P. CALL 4 1 or ¡ ¢ button
to select the desired track.
3 Press the MEMORY/SET button.
• “PGM” will light up on the display to show that
the programmed sequence is being entered into
memory.
4 Repeat steps 1 - 3 for any other track. Up to
32 tracks can be programmed.
• If you make a mistake whilst in the program-
ming mode (“PGM” will light up on the display)
or if you wish to change your selections, the pro-
grammed tracks can be cleared by pressing the
CLEAR button. The tracks will be cleared
sequentially, starting with the last track entered.
5 Press the 3 button to start playback of pro-
grammed selections.
To clear the programmed selections :
Press the CLEAR button on the remote control
whilst the disc is stopped.
• Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
Notes :
• Opening the disc tray, automatically cancels the
programmed sequence.
• Even if you press the ON/STANDBY button
to enter the standby mode or the function is
changed from CD to some other function, the
programmed selections will not be cleared.
• During program playback operation, random play
is not possible.
1
2
2
3
3
5
5
CLEAR