Kenwood XD755 Stereo System User Manual


 
31
EN
RECORDING
(TAPE B only)
Recording from the built-in radio
1
Tune in to the desired station. (see pages 19 -
21)
2 Load a cassette into the TAPE B cassette com-
partment.
3 Press the REC PAUSE button
“REC.” and “¶ 2 3” will flash.
4 Press the 2 or 3 button.
“REC.” will disappear and “¶ 2 or ¶ 3” will
light up on the display.
Note :
If a whistling noise is heard whilst recording from
an AM station, move the AM loop antenna to a
position where noise is no longer heard from
the unit.
To stop recording :
Press the 7 STOP button.
Recording from the built-in CD player
(CD Synchronised Recroding System)
1
Press the ON/STANDBY button to turn the
power on.
2 Press the CD button and load the desired disc.
Use the program playback function to store the
tracks you want to record in memory. (see page
18)
3 Load a cassette into the TAPE B cassette com-
partment.
4 Press the REC PAUSE button.
“SYNC.” and “¶ 2 3” will flash.
5 Press the 2 or 3 button.
“SYNC.” will disappear and “¶ 2 or ¶ 3” will
light up on the display.
CD playback will start approximately 5 seconds
after the tape starts
To stop recording
Press the 7 STOP button.
The CD and tape will stop.
When recording important selections, be sure to make a preliminary test to ensure that the desired
material is being properly recorded.
The volume and sound quality can be adjusted with no effect on the recorded signals (Variable Sound
Monitor).
Metal and CrO
2
tapes should not be used for recording or dubbing.
5
2
4
3
1
7 STOP
2
3
4
7 STOP