Kenwood VR-2000 Stereo Receiver User Manual


 
VR-2090/VIR-2080/KRF.V88131 DiKRF V7771 O |En/K]
Turning the power on for the first time
O Check that all of the connections have been made properly.
_) Plug the power cord into an AC wall outlet.
0 Push the Power key on the front panel. (Except for U.S.A., U.S.
Military and Canada}
Q Press the ON/STANDBY key on the front panel.
Switching the display mode (DISPLAY MODE key)
Use the following procedure to switch the mode of the main unit display.
O Press the DISPLAY MODE key.
Each press switches the mode as follows.
Connected component, analog/digital display-_ Input and connected component name display-* Listen mode display_
(Example} (Example) {Example)
DVD DGTL VIDE03 : DVD DOLBY DIGITAL
(VIDE03 DGTL) (VIDE03 : )
The display inside ( ) s shown when the connected component name is not assigned
Switching the IR RECEIVER mode (DISPLAY MODE key)
Use the following procedure to switch the IR remote control signal sensor (transmitter) in use between the transmitter on
the main unit and the IR RECEIVER,
O Press and hold the DISPLAY MODE key for more than 2 seconds.
Each holding switches the mode as follows. (Possible with the VR-2090)
IR RECEIVER OFF _ IR RECEIVER B _ IR RECEIVER A --*
In case the multi-room function is not provided li.e. except for the VR-2090)
-_ IR RECEIVER OFF -* IR RECEIVER ON -_
IR RECEIVER setting
The following table shows the IR RECEIVER setting and the status of associated functions.
IR RECEIVER OFF iR RECEIVER B IR RECEIVER A IR RECEIVER ON
IR RECEIVER Setting (Common setting for all (Possible with (Possible with {Possible with other
modelsl the VR-2090t the VR-209O) models than VR-2090I
DO not use Enables the "Room A" Use the IR RECEIVER in
Purpose the IR RECEIVER. and "Room B" setting. "Room A °', Use the IR RECEIVER.
Use the main unit
Main Unit Use the main unit sensor/ transmitter in Disables the main unit Disables the main unit
sensor/transmitter sensor/transmitter "Room A". sensor/transmitter, sensor/transmitter.
IR RECEIVER's Uses the I R RECEIVER's Uses the IR RECEIVER's Uses the IR RECEIVER's
sensor (transmitter) Disables the use. sensor Itransmitter) in
"Room B'. sensor (transmitter). sensor (transmittert.