Kenwood TS-2000 Stereo Receiver User Manual


 
87
15 OPERATOR CONVENIENCES
USING ANOTHER TS-2000 AS A COMMANDER
To use another TS-2000(X) transceiver as a
“Commander” (an external remote control unit), follow
the steps below. Basically, it is the same as using a
TM-D700A as a “Commander” (described on
pages 83 and 84).
TS-2000(X) (Transporter) Setup:
1 Press [MENU], then turn the MULTI/ CH control to
access Menu No. 62A.
2 Enter your callsign (ex: WD6DJY) as a
“Commander” callsign, using [+]/ [–] or the
MULTI/ CH control. To move the cursor, press
[MAIN] or [SUB]. Press [M.IN] to store the
callsign to Menu No. 62A.
3 Press [MENU], then turn the MULTI/ CH control to
access Menu No. 62B.
4 Enter your alias callsign (ex: WD6DJY-1) as a
“Transporter” callsign, using [+]/ [–] or the
MULTI/ CH control. To move the cursor, press
[MAIN] or [SUB]. Press [M.IN] to store the
callsign to Menu No. 62B.
Note: You can use alpha-numeric characters, A to Z, 0 to 9 and
“-”. The callsign must be no more than 9 characters long
including “-”. Also, the following callsign formats cannot be
entered:
WD6DJYZ
If you use only letters and numbers for the callsign, the
maximum length is 6 characters.
WD6-DJY-1
You cannot use more than 1 “-” within a callsign.
-WD6DJY
You cannot use a “-” as the first callsign character.
WD6DJY-19
An SSID must be within the range of 1 to 15.
5 Access Menu No. 62C, then turn the MULTI/ CH
control to select a CTCSS tone frequency for Sky
Command II+ (default is 88.5 Hz).
6 Access Menu No. 62D and select the
communication speed for Sky Command II+.
Select 1200 bps or 9600 bps.
7 Access Menu No. 46 and select SUB.
8 Select a 144 MHz band frequency in FM mode on
the main transceiver and 440 MHz band frequency
in FM mode for the sub-receiver for Sky Command
II+ operation.
TS-2000 (Commander) Setup:
1 Access Menu No. 62A and 62B to enter the same
callsign that you entered for the TS-2000
(Transporter).
2 Access Menu No. 62C to select the same CTCSS
tone frequency that you selected for the TS-2000
(Transporter).
3 Access Menu No. 62D and select the same
communication speed that you selected for the
TS-2000 (Transporter).
4 Access Menu No. 46 and select SUB.
5 Set the same frequencies that you selected for the
“Transporter” for the main transceiver and sub-
receiver.
Starting Sky Command ll+ operation:
1 On the Transporter, access Menu No. 62E.
2 Select T-PORTER (Transporter).
3 On the Commander, access Menu No. 62E.
4 Select COMMANDER (Commander).
5 Press [MAIN] on the Commander to start the
operation.
lortnoC noitcnuF
NIAMNIAM
NIAM
NIAMNIAM lortnoc
gnitarepoehtlortnocotnruT
.ycneuqerf
HC/ITLUMHC/ITLUM
HC/ITLUM
HC/ITLUMHC/ITLUM
lortnoc
gnitarepoehtlortnocotnruT
.yldiparycneuqerf
]NIAM[]NIAM[
]NIAM[
]NIAM[]NIAM[
tnerrucehtrotinomotsserP
.ycneuqerfgniviecer
]BUS[]BUS[
]BUS[
]BUS[]BUS[
ehtllaezinorcnys-erotsserP
retropsnartehtneewtebnoitamrofni
.rednammocdna
]+[]+[
]+[
]+[]+[ / ][][
][
][][
ehtnwodropuevomotsserP
zHM05/FH(dnabgnitarepo
.)sdnaboidarruetama
]M/OFV[]M/OFV[
]M/OFV[
]M/OFV[]M/OFV[
edomOFVneewtebelggototsserP
.edomllaceRyromeMdna
]TNE[]TNE[
]TNE[
]TNE[]TNE[
ycneuqerfderisedaretneotsserP
arodapyekciremunehtgnisu
yromeMnirebmunlennahcyromem
.edomllaceR
M[M[
M[
M[M[ ss
s
ss ]OFV]OFV
]OFV
]OFV]OFV
yromemehtrefsnartotsserP
.OFVotnoitamrofnilennahc
]B/A[]B/A[
]B/A[
]B/A[]B/A[ .BroAOFVtcelesotsserP
]TILPS[]TILPS[
]TILPS[
]TILPS[]TILPS[
NOnoitarepoTILPSelggototsserP
.FFOdna
]BSU/BSL[]BSU/BSL[
]BSU/BSL[
]BSU/BSL[]BSU/BSL[ .BSUroBSLtcelesotsserP
]KSF/WC[]KSF/WC[
]KSF/WC[
]KSF/WC[]KSF/WC[
ebtonnacKSF.WCtcelesotsserP
.detceles
]MA/MF[]MA/MF[
]MA/MF[
]MA/MF[]MA/MF[ .MAroMFtcelesotsserP
]TIR[]TIR[
]TIR[
]TIR[]TIR[ / ]TIX[]TIX[
]TIX[
]TIX[]TIX[
TIXro/dnaTIRehtetavitcaotsserP
.noitcnuf
]RAELC[]RAELC[
]RAELC[
]RAELC[]RAELC[
ycneuqerftesffoehtraelcotsserP
.TIXro/dnaTIRrof
]CORP[]CORP[
]CORP[
]CORP[]CORP[
hceepSehthctiwsotsserP
.NOnoitcnuFrossecorP
].N.A[].N.A[
].N.A[
].N.A[].N.A[
hctoNotuAehtelggototsserP
.FFOdnaNOnoitcnuf
].C.B[].C.B[
].C.B[
].C.B[].C.B[
lecnaCtaeBehtelggototsserP
.FFOdnaNOnoitcnuf
].R.N[].R.N[
].R.N[
].R.N[].R.N[
,1noitcudeResioNtcelesotsserP
.FFOro,2noitcudeResioN
]CNUF[]CNUF[
]CNUF[
]CNUF[]CNUF[ , ]TA[]TA[
]TA[
]TA[]TA[
dna1TNAneewtebelggototsserP
.dnabzHM05/FHrof2TNA
]CNUF[]CNUF[
]CNUF[
]CNUF[]CNUF[ ,
]LEVEL/BN/7[]LEVEL/BN/7[
]LEVEL/BN/7[
]LEVEL/BN/7[]LEVEL/BN/7[
reknalBesioNehtelggototsserP
.FFOroNOnoitcnuf
]CNUF[]CNUF[
]CNUF[
]CNUF[]CNUF[ , [[
[
[[]]
]
]] .FFOrewopretropsnarTehthctiwS