Filter
Top Products
ENGLISH
38
EN
Timer operation
Setting the timer program
(PROG. TIMER)
In each of PROG. 1 and PROG. 2, the timer data including the operating period and played contents can be
programmed and set to be activated or deactivated.
Adjust the clock before setting the timer
$
Connect the related equipment under reference to "System connections"
6~8
1
Make preparations for timer.
Listening to external input sources
Listening to CD
Listening to radio
Set a disc.
(Only normal playback is possible.)
Radio stations should be preset
beforehand. ∞
Set the timer for a component
connected to external input jacks.
÷ The programs of "PROG.1" and "PROG.2" can be set at the same time.
÷ For the simultaneous programs setting, keep the time intervals of 1 minute or more between timer programs, in order
to avoid time overlapping.
2
Set the timer setting program number.
1 Press the MODE key and select "TIMER
SET" by pressing the 4/¢ key, and press
the ENTER key.
MOD
E
ENTE
R
2 Select "PROG.1 SET" or "PROG.2 SET" by
pressing the 4 / ¢ key.
3 Press the ENTER key.
ENTE
R
Each press of the 4 / ¢ key switches the display
items;
"PROG.1 SET"
"PROG.2 SET"
CD
L
R
3010 5 3 1 0
(-dB)
1
12345
÷ The previously set contents are displayed. (If you do
not want to change them, simply press the ENTER
key.)
÷ When a timer setting has already been made in the
selected timer, the setting will be overwritten by the
new setting.
04.12.16, 0:23 PM38