Filter
Top Products
19
EN
ENGLISH
Basic use method
TONE / TURN OVER setting
In this unit, TREBLE and BASS sounds can be
adjusted to your preferences. (TONE)
In addition, frequency characteristics of the
TREBLE and BASS sounds can be adjusted
with the three types of Low, Mid and High.
(TURN OVER)
1 Select "BASS" by pressing the SOUND
SELECTOR key. Or press the TONE TURN
OVER key on the remote control unit.
SOUND SELECTO
R
or
2 Select a frequency type (Low: 100Hz, Mid:
150Hz, High: 200Hz) by pressing the SOUND
PRESET @ / # key on the remote control unit.
3 Adjust the level of BASS with the SOUND
CONTROL knob [SOUND CONTROL % / fi
key].
Turn the SOUND CONTROL knob.
SOUND CONTROL
or
Press the SOUND CONTROL % / fi key.
Decrease
the level
Increase
the level
Using Digital Sound Equalizer
function
Decrease
the level
Increase
the level
D-BASS Setting
1 Select "D-BASS" by pressing SOUND SE-
LECTOR key on the main unit or the D-BASS
key on the remote control unit.
SOUND SELECTO
R
or
÷ The D-BASS indicator blinks.
2 Adjust the level with the SOUND CONTROL
knob or the SOUND CONTROL % / fi key.
Turn the SOUND CONTROL knob.
SOUND CONTROL
÷ When the SOUND Setting mode is in OFF,
by simply turning the SOUND CONTROL knob,
it can enter the D-BASS setting mode.
or
Press the SOUND CONTROL % / fi key.
÷ The level can be adjusted at the range of 0 - 10.
÷ If no operation continues for 20 seconds, the
display returns to the original display.
÷ The D-BASS indicator lights up after the setting
(when the level is 1 or more).
CD
MD
REPEAT
FM
MHz
TUNED ST. AUTO
D-Bass
The D-Bass indicator lights up.
Continued to next page
D-Bass level is displayed.
04.12.15, 23:4719