Filter
Top Products
34
EN
ENGLISH
To add a track to an existing program
1Select the track number to be added with
the Numeric keys on the remote control unt.
2 Press the ENTER key.
To clear a programmed track
Press the CLEAR key on the remote control
unit.
To get out of the PGM mode
Press the P.MODE key on the remote
control unit to turn off the PGM indicator.
Press the Numeric keys as shown below;
To select track No. 23: +10, +10, 3
To select track No. 30: +10, +10, +10, 0
÷ Up to 32 tracks can be programmed. When "PGM
FULL" is displayed, no more tracks can be
programmed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
CD
TTL
L
R
3010 5 3 1 0
(-dB)
PGM
12345
P-01 has been deleted
÷ Each time the key is pressed, the last track in the
program is cleared.
CD
L
R
3010 5 3 1 0
(-dB)
12345
Goes off
The program mode is canceled when the unit is turned off or the disc is ejected. The programmed information is
cleared entirely at this time.
Various CD playback features
Press the key in
the stop mode.
Press the key in
the stop mode.
Press the key in
the stop mode.
04.12.15, 23:5034