Filter
Top Products
20
EN
ENGLISH
Basic use method
Making your favorite sounds (MANUAL EQ )
This unit is equipped with 7-band equalizer. It
enables you to make your favorite frequency
response curve with frequencies from super
bass to super high range. ¡
1 Press the MANUAL EQ key on the remote
control unit.
÷ Equalizer curve, level and frequency are
displayed and the EQ indicator blinks.
2 Select an equalizer band(frequency) by
pressing the SOUND PRESET @ / # key on
the remote control unit.
÷ The display of selected band blinks.
÷ The frequency bands from 1 to 7 can be
selected.
3 Adjust the equalizer level by pressing the
SOUND CONTROL % / fi key on the remote
control unit.
÷ The level can be adjusted by one step (1dB) at
the range of -8(dB) to +8(dB).
÷ The manual EQ setting mode will be cancelled
when the MANUAL EQ key is pressed, or
no operation is continued for 20 seconds.
÷ Image of level adjustment
LEVEL(dB)
Variable
levels
Frequency
0
+8
-8
4 Repeat the steps 2 and 3 to adjust the
levels for your favorite BASS sound.
5 Select "TREBLE" by pressing the SOUND
SELECTOR key. Or press the TONE TURN
OVER key on the remote control unit.
6 Select a frequency type (Low: 5kHz, Mid:
7kHz, High: 10kHz) by pressing the SOUND
PRESET @ / # key on the remote control unit.
7 Adjust the level of TREBLE with the SOUND
CONTROL knob [SOUND CONTROL % / fi
key].
8 Repeat the steps 6 and 7 to adjust the
levels for your favorite TREBLE sound.
9 Press the SOUND SELECTOR [ TONE TURN
OVER ] key.
÷ The level can be adjusted by one step (1dB) at the
range of -6(dB) to +6(dB).
÷ If no operation continues for 20 seconds, it returns
to the original display.
÷ The TONE indicator lights up after the setting
when the level is other than "0".
÷ Image of variable frequencies (TURN OVER)
Frequency
LEVEL
Variable
Frequencies
Variable
Frequencies
BASS
TREBLE
High
Mid
Low
÷ Image of the level adjustment
LEVEL(dB)
0
+6
-6
BASS TREBLE
Variable
levels
Frequency
04.12.15, 23:4720