Kenwood KTF-2010 Radio User Manual


 
KTF-3010/KTF-2010 (En)
11
1
Set to the Call up (Sellect) mode.
2
Select one of the preset numbers.
[ ............................................................................................................................ ]
Receiving a preset station
HIGHBLEND
WIDE
NARROW
RFATT
TUNING
MODE
+10/CLEAR
1
ACTIVE
RECEPTION IF BAND
RF ATT
TA/NEWS
PTY/
PTY SCARCH
DISPLAY
ANT A
/
B
MEMORY
AM
-
FM STEREO SYNTHESIZER TUNER
KTF-3010
BAND
P. CALL
DOWN UP
TUNING/MULTI CONTROL
3456789
0/CHARA.
2
ON/STANDBY
R D S
EON
: Keys or controls to be used in this operation.
The figure shows an example for the KTF-3010
Receiving a preset station
P. CALL
TUNED
AUTO
kHz
STEREOSTANDBY ANT A BMEMO
AR
5PCLAL0
AM
FM
÷ Press P.CALL key once more to cancel the call up mode and return to
the original display.
DOWN UP
TUNING/MULTI CONTROL
When you stop turning the knob, you tune in on the preset
station.
Instead of steps 1 and 2, you can use the numeric keys
(0~9,+10), to store the broadcast stations.
÷ You cannot enter numbers over 40.
÷ If you make a mistake when pressing the 0 key, press the 0
key several times to return to the original display before re-entering.
Press the numeric keys (0 to 9, +10) in the
following order.
To select “15”...0,5
To select “20”...0,0, )
÷ While the display is blinking, you can select the next station.
÷ If the tuner has stored a preset station name or program service name,
each will be displayed.
TUNED
AUTO
kHz
MHz
STEREOSTANDBY ANT A B
AR
629)))
.
AM
FM
Blinks for 5 sec.
Memory back up
Even if the power cord is unplugged from the AC outlet, the
preset memory contents will be backed up for 3 days.
Last channel memory
When the power is turned ON or the BAND key is pressed to
switch the band, the last station previously received is auto-
matically tuned in.