Filter
Top Products
KTF-3010/KTF-2010 (En)
10
The AUTO MEMORY function automatically calls up only those stations which have RDS broadcasts for storing
(up to 40 stations can be stored).
1 Turn the TUNING/MULTI CONTROL knob.
AUTO MEMORY (Storing stations automatically in memory )
Storing broadcast stations in memory
HIGHBLEND
WIDE
NARROW
RFATT
TUNING
MODE
+10/CLEAR
1
ACTIVE
RECEPTION IF BAND
RF ATT
TA/NEWS
PTY/
PTY SCARCH
DISPLAY
ANT A
/
B
MEMORY
AM
-
FM STEREO SYNTHESIZER TUNER
KTF-3010
BAND
P. CALL
DOWN UP
TUNING/MULTI CONTROL
3456789
0/CHARA.
2
ON/STANDBY
R D S
EON
: Keys or controls to be used in this operation.
The figure shows an example for the KTF-3010
The automatic memory function allows you to store up to
40 stations using only one button.
The manual preset function allows you to store stations
one at a time.
Use the automatic memory function first.
MEMORY
1 Switch to FM band.
2 Press and hold the MEMORY key (for more than 2 seconds).
The tuner completes the scanning of frequencies in 5 minutes.
While scanning, "AUTO" and "MEMORY" are displayed in turn.
÷ Unless stations are stored with the automatic memory function, EON
reservation and PTY search will not work.
÷ AR will not work when the automatic memory function is on.
÷ Broadcast stations stored manually may be overwritten.
÷ Stations already stored in the preset memory may be replaced by RDS
stations. (i.e., If the RDS AUTO MEMORY function finds 15 RDS sta-
tions, the stations currently preset at numbers 01- 15 are replaced by
the RDS stations.)
÷ If the antenna is replaced, you will have to reset the automatic memory
function.
÷ Stored stations may be erased from the memory.
MANUAL PRESET(Storing stations one at a time)
1
Tune in the station to be preset
2
Press the MEMORY key
MEMORY
If you press the MEMORY key when the preset number dis-
played is "
- -
", the smallest unstored number appears.
3
Select one of the preset numbers from 1 to 40.
2 Select the desired station.
DOWN UP
TUNING/MULTI CONTROL
MEMORY
TUNED
AUTO
kHz
MHz
STEREOSTANDBY ANT A BMEMO
AR
1089))
AM
FM
Perform the operations in the five seconds that the display is blinking.
Lights (for 5 sec.)
(If more than 5 sec. have elapsed, press the MEMORY key again.)
TUNED
AUTO
MHz
STEREOANT AMEMO
AR
FM
51 9) )).
Blinks Lights (for 5 sec.)
The numbers 1 to 40 appear, in turn, as you turn the knob.
÷ Repeat steps 1 to 3 for each of the stations to be stored in memory.
÷ If a station is stored in a preset number which already stores a station
memory under it, the previous memory is replaced by the new memory
content.
÷ Once the memory content has been preset, it is held for about 3 days
even after the power cord is unplugged from the mains outlet.
÷ You cannot enter numbers over 40.
÷ If you make a mistake when pressing the 0 key, press the 0
key several times to return to the original display before re-entering.
÷ The stored station will be erased from the memory.
02
,
01
,
03 39
,
4038
,
Press the numeric keys (0 to 9, +10) in the
following order.
To select “15”...0,5
To select “20”...0,0, )
Instead of steps 1 and 2, you can use the numeric keys
(0~9,+10), to store the broadcast stations.