Filter
Top Products
26
KR-V888D (En/T)
Operations
Listening to radio broadcasts
1
2
3
Press and hold the "MEMORY"
key for more than 2 seconds.
This function automatically stores up to 40 RDS stations in the preset memory. In order to use the EON and PTY functions, the
RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function.
Enter the number of the preset
you want to receive (up to "40").
Press the numeric keys in the following order:
For "15", press 0,5
For "20", press 0,0,)
•If you make a mistake entering a two digit number, press the +10 key
several times to return to the original display and start again.
•To change the information in the display, press the DISPLAY key.
Each press switches the band as follows:
1 FM
2 AM
Set the input to tuner.
Set the broadcast band to "FM".
Store the stations automatically.
Presetting RDS stations
(RDS AUTO MEMORY)
Receiving preset RDS stations
Before listening to an RDS broadcast, follow the instructions
below to store the RDS stations in the preset memory.
Up to 40 stations can be preset, and then receivied with the
touch of a single button.
This receiver uses the Radio Data System (RDS) to provide
convenient tuning functions like PTY search and EON reser-
vation.
AUDIO
SHIFTMACRO
TVVIDEO
GUIDEREC
MUTE
VOLUMETUNING/SKIP
THEME FAVMENU
FUNCTION
SHIFT
SETUP
INFO ALT AUDTV/SAT/VID
REPEAT RANDOM+100
DISPLAY
ENT+10
LISTEN
MODE
SOUNDSUBWOOFER
564
231
897
0
8
7
4¢
6
BAND
P. CALL P. CALL
PHONES
1234567890
STANDBY
MUTE
LEVEL
INDICATOR
DIRECTMEMORY
ABSPEAKERS
AUTO
TUNING BASS TREBLEBAND
LEVEL CONTROL
PRO LOGIC
3 STEREO STEREO
DSP
LOUDNESS
SOURCE DIRECT
DIMMER
INPUT SELECTOR VOLUME CONTROL
VIDEO
ON/STANDBY
DOWN UP
AV AUX
L
-
AUDIO
-
R
MUTE
TA/NEWS/INFO. PTY DISPLAY
+10/
PTY SEARCH
POWER
-ON–OFF
AUDIO−VIDEO SURROUND RECEIVER KR-V888D
TRAITR
thermally reactive advanced instantaneous transistor
DOLBY
DIGITAL
POWER
Keys or controls used in this operation.
A
-- 89 )).
FM
MHz
A
SP.
"FM" is displayed
A
AUTO ME MO
FM
A
SP.
•After a few minutes, up to 40 RDS stations are preset in order from
channel "01".
• Stations already stored in the preset memory may be replaced by RDS
stations. (i.e., If the RDS AUTO MEMORY function finds 15 RDS
stations, the stations currently preset at numbers 01~15 are replaced
by the RDS stations.)
Blinks
A
15 89 )).
FM
MHz
A
RDS
SP.
INPUT SELECTOR
89 )).
FM
MHz
Frequency display
TUNINGBAND
MEMORY
456789