Filter
Top Products
32
EN
MULTI
CONTROL @
/
#
INPUT SELECTOR
MULTI CONTROL %/fi
SOUND
SOUND
DIMMER ‹
SLEEP ‹
1 Press the SOUND key until the desired item appears in
the display.
Each time you press the button, the menu changes as follows:
Note that some items are not displayed depending on speaker
settings and listening mode.
1 "C": *1
Center speaker level adjustment
2 "RS":*1
Right surround speaker level adjustment
3 "RB": *1
Surround back right speaker level adjustment
4 "LB": *1
Surround back left speaker level adjustment
5 "LS": *1
Left surround speaker level adjustment
6 "SW": *1
Subwoofer level adjustment
7 "INPUT": (Analog mode only) (
Input level adjustment
8 "NIGHT": *2 ‹
Midnight mode adjustment
9 "PANORAMA": *3
Panorama mode ON/OFF
0 "DIMENSION": *3
Dimension adjustment
- "CENTER WIDTH": *3 ‹
Center width adjustment
*1 The setting in the SOUND mode is temporary. It returns
automatically to the original level set in "Speaker settings"
when the receiver is turned OFF/ON. ^
*2 DOLBY DIGITAL, DTS mode only
*3 Only when the input signal is a 2-channel signal in the DOLBY
PRO LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode.
2 Use the MULTI CONTROL button (or the MULTI CONTROL
%/fi keys) to adjust the setting as desired.
÷ The adjustment item is displayed for approximately 20 seconds.
3 Press the SOUND key to advance to the next setting item.
You can make further adjustments to the sound while listening to
playback in the surround mode.
Adjusting the SOUND
Panorama mode
(Only when the input signal is a 2-channel signal in the DOLBY
PRO LOGIC
II
x MUSIC or DOLBY PRO LOGIC
II
MUSIC mode)
When listening to music, you will be able to enjoy the "wraparound"
sound effect when you adjust the panorama mode.
1 Press the SOUND key repeatedly until the "PANORAMA"
indication appears.
2 Use the MULTI CONTROL button (or the MULTI CONTROL
% / fi keys) to select PANORAMA mode "ON" or "OFF".
Dimension mode
(Only when the input signal is a 2-channel signal in the DOLBY PRO
LOGIC
II
x MUSIC or DOLBY PRO LOGIC
II
MUSIC mode)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1 Press the SOUND key repeatedly until the "DIMENSION"
indication appears.
2 Use the MULTI CONTROL button (or the MULTI CONTROL
%/fi keys) to adjust the soundfield towards the rear or
the front.
Soundfield is adjusted towards the front.
↓
Standard setting.
↓
Soundfield is adjusted towards the rear.
Convenient functions