Filter
Top Products
36
EN
Midnight mode (Dolby Digital and DTS mode only)
When watching movies at night , you might not be able to raise the
volume as loud as normal. Midnight mode compresses the dynamic
range of previously specified heavy sound passage of the Dolby Digital
and DTS sound track (like scenes with sudden increases in volume) to
minimize the difference in volume between the scenes with heavy
sound passage and scenes with normal sound passage. This makes it
easy to hear all of the sound track, even when listening at low volumes.
1 Press the SOUND key, then press the
55
55
5/
∞∞
∞∞
∞ keys or MULTI @/#
keys until “MIDNIGHT” appears on the display.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3
is selected as the source and the listen mode is set to “DOLBY
DIGITAL” or “DTS”.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the ON or OFF setting.
L
SL SSBSR
CR
LFE
SP MUTE
AB CLIP
DIGITAL DOLBY DIGITAL STEREO
AUTO DETECT
• The adjustment item is displayed for approximately 20 seconds.
• Some Dolby Digital or DTS software may not be compatible with the
Midnight mode.
3 Press the SOUND key again to return to the input indication.
Panorama mode (Pro Logic
II
x Music and Pro Logic
II
Music
mode only)
When listening to music, you will be able to enjoy the “wraparound”
sound effect when you adjust the panorama mode.
1 Press the SOUND key, then press the
55
55
5/
∞∞
∞∞
∞ keys or MULTI @/#
keys until “PANORAMA” appears on the display.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
PANORAMA ON or OFF.
1 PANORAMA ON : PANORAMA mode is ON.
2 PANORAMA OFF : PANORAMA mode is OFF.
L
SSB
R
LFE
SP MUTE
AB CLIP
DOLBY PL II x
STEREO
AUTO DETECT
3 Press the SOUND key again to return to the input indication.
Adjusting the sound
You can make further adjustments to the sound while listening to
playback in the surround mode.
STEREO
SOUND
SLEEPDIMMER
LISTEN MODE
%/fi
MULTI %/fi,
@/#
DIMMER SOUND LISTEN MODE
MULTI CONTROLSTEREO
1 For the remote control, press the RCV MODE key to switch to
receiver mode.
2 Press the SOUND key and then use the
55
55
5/
∞∞
∞∞
∞ keys or MULTI @/#
keys until the desired item appears in the display.
Each time you press the
55
55
5/
∞∞
∞∞
∞ keys or MULTI @/# keys, the menu
changes as follows:
Note that some items are not displayed in certain modes.
1 CNTR (Center Speaker level adjustment)*
2 SR (Right Surround Speaker level adjustment)*
3 SB (Surround Back Speaker level adjustment)*
4 SBR (Surround Back Right Speaker level adjustment)*
5 SBL (Surround Back Left Speaker level adjustment)*
6 SL (Left Surround Speaker level adjustment)*
7 SUBW (Subwoofer level adjustment)*
8 INPUT (Input level adjustment - analog mode only) ¢
9 MIDNIGHT
(Midnight mode ON/OFF - Dolby Digital and DTS mode
only)
0 PANORAMA (Panorama mode
ON/OFF
)**
- DIMENSION (Dimension adjustment)**
= CENTER WIDTH (Center width adjustment)**
~ CENTER IMAGE (Center image adjustment - Neo:6 Music
mode only)
! DUAL MONO
(Dual Mono selection - Dolby Digital mode only)
* The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value when
the power is turned on/off.
** Pro Logic II x Music and Pro Logic II Music mode only.
• If you have selected “SB NML/THXx1” or “SB LARGEx1”, “SBR”
and “SBL” are not appeared but “SB” is appeared on the Display.
3 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
setting as desired.
•The adjustment item is displayed for approximately 20 seconds.
4 Press the SOUND key again to return to the input indication.
Convenient functions
05.2.8, 1:00 PM36