Filter
Top Products
24
EN
Adjusting the sound
Adjusting the TONE
You can adjust the sound quality when the receiver is in the PCM stereo
mode, analog stereo mode and when “THX OFF”.
1 For the remote control, press the RCV MODE key to switch to
receiver mode.
2 Press the TONE key to select the TONE mode.
3 Use the MULTI CONTROL knob or MULTI %/fi keys to select
TONE ON/OFF.
L
SL S SB SR
C R
SP MUTE
AB CLIP
LFE
STEREO
4 When in TONE ON selection, press the TONE key for the following
displays.
BASS : Select this to adjust the low frequency range.
TREBLE : Select this to adjust the high frequency range.
5 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
sound quality.
L
SL S SB SR
C R
SP MUTE
AB CLIP
LFE
STEREO
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 20 seconds.
• This function is available only for speakers connected to FRONT A
terminals.
LOUDNESS
TONE
VOLUME
CONTRO
L
ACTIVE EQ
PHONES BASS BOOST
MULTI CONTROL
BASS BOOST
ACTIVE EQ
TONE MUTE
RCV MODE
VOLUME%/fi
MULTI %/fi
Normal playback
Input level adjustment (analog sources only)
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator
will light up to indicate the source signal. Adjust the input level.
L
SL S SB SR
C R
SP MUTE
AB CLIP
LFE
CLIP
CLIP
DOLBY PL II x
1 Use the INPUT SELECTOR key or Input Selector keys to select the
source of which the input level you want to adjust.
• You can store a separate input level for each input source.
2 For the remote control unit, press the RCV MODE key to switch
to receiver mode.
3 Press the SOUND and 5/∞ keys
or MULTI
@/# keys repeatedly
until the “INPUT” indication appears.
4
Use the MULTI CONTROL knob or MULTI
%/fi keys
to adjust the
input level.
L
SL S SB SR
C R
SP MUTE
AB CLIP
LFE
DOLBY PL II x
• The adjustment mode is displayed for approximately 20 seconds.
• The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
5 Press the SOUND key again to return to the input indication.
Input Selector
keys
INPUT SELECTOR
MULTI CONTROL
SOUND
SOUND
MULTI %/fi,
@/#
05.2.8, 0:57 PM24