Filter
Top Products
22
EN
7
Adjust the bass peak level.
A restriction is put on the low frequency so that the bass peak level
will not go higher than the acceptable level when the volume is
increased.
If Subwoofer is OFF, the limitation will affect the low frequency of
the Front Left and Right Speakers.
1 Press the 5/∞
keys or MULTI @
/
# keys to select BASS PEAK
and press the SETUP key.
LR
SP MUTE
AB CLIP
LFE
STEREO
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust
the bass peak level to –30dB.
• The adjustment range is from – 30dB to 0dB and OFF.
3 For optimum bass peak level, keep increasing the bass peak
level by using the MULTI CONTROL knob or MULTI %/fi keys
while test tone is being output until clip sound is heard from
the Subwoofer or Front Speaker.
SP MUTE
AB CLIP
SW
LFE
4 Press the SETUP key to accept the setting.
8
Input the distance to the speakers.
• Indicators appear only for the channels of the speakers selected
in step 4.
1 Press the 5/∞ keys or MULTI @/# keys to select the SP
DISTANCE on setup displays and press the SETUP key again.
2 Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L) : ____ feet (meters)
Distance to Center Speaker (C) : ____ feet (meters)
Distance to Front Right Speaker (R) : ____ feet (meters)
Distance to Surround Right Speaker (SR)
: ____ feet (meters)
Distance to Surround Back Right Speaker(SBR)
: ____ feet (meters)
Distance to Surround Back Speaker(SB)
: ____ feet (meters)
Distance to Surround Back Left Speaker (SBL)
: ____ feet (meters)
Distance to Surround Left Speaker (SL)
: ____ feet (meters)
Distance to Subwoofer (SW) : ____ feet (meters)
• If you have selected “SB NML/THXx1” or “SB LARGEx1”,
“SBR” and “SBL” are not appeared but “SB” is appeared on the
Display.
3 Use the 5/∞ keys or MULTI @/# keys to select the speakers
and the MULTI CONTROL knob or MULTI %/fi keys to adjust
the distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
L
SL S SB SR
CR
SP MUTE
AB CLIP
SW
LFE
STEREO
Indication in feet Indication in meters
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
Preparing for surround sound
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
9
Adjust the LFE LEVEL (Low Frequency Effects).
1 Press the 5/∞ keys
or MULTI
@/# keys to select the LFE
LEVEL and press the SETUP key.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust
the LFE LEVEL.
LR
SP MUTE
AB CLIP
STEREO
• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB
decrements.
3 Press the SETUP key again to return to main setup displays.
0
Select the display mode.
1 Press the 5/∞ keys
or MULTI
@/# keys to select the DISP
MODE and press the SETUP key.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the display mode.
1 DISP SELECTOR : Displays the current input selector.
2 DISP LISTEN : Displays the current listen mode.
SP MUTE
AB CLIP
LR
STEREO
3 Press the SETUP key again to accept the setting.
4 Use the 5 key or MULTI # key to select EXIT.
LR
SP MUTE
AB CLIP
SL S SB SR
STEREO
5 Press the SETUP key to exit the SETUP mode.
05.2.21, 11:51 AM22