Kenwood VR-4080 Stereo System User Manual


 
18
Using Receiver
How Do I Adjust the Sound?
Dolby Digital: Dolby Digital uses an encode/decode process based
on its theatrical digital surround sound technology. The five main
channels are full-frequency and independent, so sound can completely
envelop you or soar anywhere in the room, just like at the movies.
Compared with Dolby Pro Logic, Dolby Digital has more clarity,
greater surround envelopment, and more realistic sound movement
between channels.
Although a full set of speakers (front left and right, center, surround
left and right, and a subwoofer) is required for true Dolby Digital
surround sound, this receiver lets you enjoy Dolby Digital program
sources, even if you connect fewer speakers.
DTS : DTS has five full-frequency channels that create effects nearly
identical to those in a theater. Sounds seem to zoom from one place
to another or entirely surround you. Like Dolby Digital, DTS has much-
improved clarity, surround and sound movement capability compared
with Dolby Pro Logic. This listen mode is available on CD, LD, and
DVD media. DTS is a strictly digital format that can be supplied only
by a CD, LD, or DVD player that supports DTS sound. If you attempt
to listen to DTS encoded media through the analog connections to
your new receiver, you will experience digital noise (loud static).
You cannot select the Input Analog mode if you are playing DTS-encoded
media.
When playing DTS-encoded media, wait until DTS indicator is lit on the
receiver display before proceeding.
The listen mode is fixed to Stereo during playback of 96 kfs signals.
19
Using Receiver
How Do I Adjust the Sound?
123
456
789
10 11 12
+10 0 +100
/8
/7
1
1
Checking the listen mode during playback
The receiver detects the recording format and adapt itself to it automati-
cally. The current surround mode can be checked as follows.
1. Press the F.SHIFT = SUB.W (STATUS)* key on Remote Control unit.
After 8 seconds, the display goes off.
Input Status
PCM
F.Auto
To set the listen mode manually:
The listen mode can be set manually except with certain input signals.
1. Press the receiver’s LISTEN MODE key or Remote Control unit’s LIS-
TEN M. key repeatedly until the desired listen mode is displayed.
Listen Mode
Dolby Prologic
F.Auto
* When an operation is described as [F.SHIFT = SUB.W (STATUS) key],
for example, press the F.SHIFT key and press the Next key (the SUB.W
(STATUS) key in this case) within 8 seconds.