Kenwood VR-4080 Stereo System User Manual


 
10
Using Receiver
How Do I Adjust the Sound?
Adjusting the Volume
Use one of the following methods to adjust the volume.
• Turn the VOLUME knob on the front panel of the receiver.
L
SPEAKERS
R
INPUT
MODE
CD 2/TAPE 2
MONITOR
LISTEN
MODE
SET UPSOUND
MULTI
CONTROL
fi %
P.CALL MEMORYAUTOBAND
fi %
• Press
+
VOL.
or
-
VOL.
on Remote Control unit.
2WAY LCD REMOTE CONTROL UNIT
+
-
+
-
11
Using Receiver
How Do I Adjust the Sound?
Adjusting the Tone (Stereo mode only)
The Tone control adjusts the bass and treble tone of your front speakers
manually. In addition to setting Bass and Treble tone adjustment values,
you can completely bypass the tone control circuitry for a purer sound.
1. Press the SOUND key on Remote Control unit repeatedly until Tone
= Off or On is displayed.
On or Off refers to the current setting status.
2. Press the LCD cursor up/down (
/ ) key on Remote Control unit
to select Tone = On (or Off if desired so).
3. When On is selected above and the SOUND key or Next key is pressed
again, the Bass setting menu appears.
When Off is selected above, the Loudness setting menu appears.
4. Press the LCD cursor up/down (
/ ) key on Remote Control unit
to select the desired tone level.
Adjust in the range from +10 to -10.
Sound
Tone = Off
Home Next
Sound
Bass = +10
Home Next