Kenwood KDC-X991 CD Player User Manual


 
English
|
63
No Device: The USB device is selected as a source
although no USB device is connected.
N/A Device: An unsupported USB device is connected.
For the supported USB devices, refer to
<http://www.kenwood.com/usb/>.
No Music Data/ Error 15:
• The connected USB device contains no
playable audio file.
• The Internal Memory source contains no
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
USB ERROR: The connected USB device is rated a current
capacity higher than the allowable limit.
Check the USB device with reference to
<http://www.kenwood.com/usb/>.
Some trouble may have occurred to the
connected USB device.
Change the source to any source other
than USB. Remove the USB device.
iPod Error: Connection to the iPod has failed.
Remove the USB device and then
reconnect it.
Confirm that the software for the iPod is
the latest version.
USB REMOVE: The Remove mode has been selected for the
USB device. You can remove the USB device
safely.
Over Capacity: Recording or copying was canceled because
internal memory space ran out while
recording from music CD or copying from
USB device.
Delete unnecessary files and record or
copy once more.
Name Exists. Raname... :
Name Exists. Auto Rename? :
The name entered while recording CD
already exists. Or a file or folder with the same
name already exists while copying from USB
device.
Change the name or delete the existing
file and record or copy once more.
Import Error: Recording is canceled because there is a
scratch on the CD and it cannot be played.
Copy Error: • An incompatible digital audio player was
used.
• Cannot copy because the USB device is not
firmly inserted.
Delete Error:
Format Error: Abnormal condition detected while deleting
or formatting.
Repeat the operation once more. This may
take some time. If the message recurs,
contact your nearest Kenwood dealer.
Can’t Download:
Download Error:
This unit does not work properly for some
reason.
Press the reset button to download it
again. If this error is still displayed, consult
a local Kenwood dealer.
Try all over again from the start. If this error
is still displayed, consult a local Kenwood
dealer.
No Display File:
No file that can be downloaded is contained
in the CD-R/ CD-RW/ USB device.
Make sure that a files created with
referring to <http://www.kenwood.net-
disp.com> is contained in the CD-R/ CD-
RW/ USB device.
Do not delete the extension (.kbm)
created when the file was created.
Incorrect File: The file selected to be downloaded has a
format that this unit cannot read.
Recreate the file.
Writing Error: Writing failed while the file was downloaded.
Try the downloading again.