Filter
Top Products
English
|
31
Playing USB (iPod) device
When the USB device is not connected
Connect the USB device
Playback of the file contained in the USB device
starts.
When the USB device is connected
Select USB source
Press the [SRC] button.
Select the "USB" (or "iPod") display.
Refer to <Selecting the Source> (page 8).
⁄
• For the audio files that can be played with this unit and
the devices that can be connected to this unit, refer to
<About Audio file> (page 5).
• The word "iPod" appearing in this manual indicates the
iPod connected with the KCA-iP200 (optional accessory).
Refer to <About Audio file> (page 5).
• If you start playback after connecting the iPod, the music
that has been played by the iPod is played first.
In this case, "RESUMING" is displayed without displaying
a folder name, etc. Changing the browse item will
display a correct title, etc.
• When the iPod is connected to this unit, "KENWOOD" or
"✓" is displayed on the iPod to indicate that you cannot
operate the iPod.
• When the USB device is connected to this unit, it can be
charged up provided that this unit is powered.
• When the Multi Card Reader is used, refer to <Drive
Search> (page 32).
• After you stopped playing a file contained in the USB
device, you can restart playing the file from the point
where you stopped its playback.
Even after removing the USB device, you can restart
playing the file from the point where you stopped its
playback as long as the files contained in the USB device
are all the same.
• Be sure to insert the USB device connector as far as it will
go.
Removing the USB device
1 Set the remove mode as the USB source
Press the [0] button for at least 2 seconds.
"USB REMOVE" display blinks.
2 Remove the USB device.
Playing Internal Memory
Press the [SRC] button.
Select the "Internal Memory" display.
Refer to <Selecting the Source> (page 8).
Playing External Disc
Playing discs set in the optional accessory disc
player connected to this unit.
Press the [SRC] button.
Select the display for the disc player you want.
Refer to <Selecting the Source> (page 8).
Display examples:
Display Disc player
"CD Changer" CD changer
"MD Changer" MD changer
⁄
• The functions that can be used and the information that
can be displayed will differ depending on the external
disc players being connected.
Pause and play
Press the Control knob.
Each time you press the knob, the audio pauses or
plays.