Filter
Top Products
English
|
23
In Standby mode
Display Type E
G-Analyzer vehicle weight setup
Enter vehicle weight to calculate horsepower.
1 Enter G-Analyzer vehicle weight setup mode
Using the Control knob, select "DISPLAY" >
"GMA" > "GAUGE" > "WEIGHT".
For the operation method, refer to <Function
Control mode> (page 11).
"WEIGHT INPUT" is displayed.
2 Select the weight numbers
Turn the Control knob.
⁄
• The weight input range is between 1000-9999 lbs.
3 Select the digits to enter
Push the Control knob towards right or left.
4 Repeat steps 2 and 3, and complete the weight
input.
5 Exit G-Analyzer vehicle weight setup mode
Press the Control knob.
In Standby mode
Display Type E
G-Analyzer vehicle class setup
Enter vehicle class to calculate horsepower.
1 Enter G-Analyzer vehicle class setup mode
Using the Control knob, select "DISPLAY" >
"GMA" > "GAUGE" > "CLASS".
For the operation method, refer to <Function
Control mode> (page 11).
"CLASS SELECT" is displayed.
2 Select vehicle class
Turn the Control knob.
Each time you push the knob, the vehicle class
alternates between the modes shown in the table
below.
Display
"Mid Size"
"Full Size"
"SUV"
"Van/ Mini-Van"
"Pickup Truck"
"Sporty"
"Compact"
3 Exit G-Analyzer vehicle class setup mode
Press the Control knob.