Kenwood KDC-X991 CD Player User Manual


 
English
|
37
8 Enter the name
Operation type Operation
Move the cursor to the enter
character position
Push the Control knob towards right
or left.
Select the character type* Press the Control knob.
Select the characters Turn the Control knob or push it
towards up or down.
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Character type Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
Enter characters by using a remote control with numbers
buttons.
Example: If you are entering "DANCE".
Character "D" "A" "N" "C" "E"
Button [3] [2] [6] [2] [3]
Times pressed 11232
9 Confirm the name
Using the Control knob, select "ENTER ".
10 Start recording
Press the Control knob.
Recording track no. and remaining time
"Completed" is displayed when recording
completes.
Canceling recording
1 Cancel recording
Press the [FNC] button.
Exits Import Mode when pressed by step 4.
2 Select "YES"
Select "YES" using the Control knob.
11 Exit Record mode
Select "EXIT" using the Control knob.
Returns to step 3 if "NEXT" is selected.
• Recording is possible only from music CD and not from
CD containing audio files. Copy audio files from USB
device.
• Sound may skip due to vibration when the vehicle is in
motion. The song will be recorded together with the
skip.
• Normal recording or playback may not be possible with
some CDs.
• DSP cannot be enabled while recording, but it can be
enabled during playback.
• When a song is selected, the remaining recording time is
decreased by the length of the recording. The remaining
recording time is a rough estimate. It may increase of
decrease when recording is completed.
• If recording is canceled or if space runs out while
recording, the recorded songs will remain.
• There is no tag (song information) on the recorded file.
• File name or folder name may contain up to 16
characters.
• If a folder name is specified when recording multiple
songs, the file name will be "foldername_tracknumber".
• If there is a file or folder with the same name, a number
is added as "Name_001".
• If file name or folder name is not specified:
- Single song recording: Files are named sequentially
starting from "CD000_001.wma".
- Multi song recording: Folders are named sequentially
starting from "CD001".
- File and folder name are incremented successively
from the last number even if files in the middle are
deleted. The number returns to 001 when 999 is
reached.
- Setting file name and folder name is recommended.