Kenwood KDC-X891 CD Player User Manual


 
English
|
47
ANT.
CONT
MUTE
P.CONT
FRONT • L
FRONT • R
REAR • L
REAR • R
+
REMO.CONT
FRONT
SUB
WOOFER
REAR
Connecting Wires to Terminals
FM/AM antenna input
Front left output (White)
Front right output (Red)
Fuse (10A)
Wiring harness (Accessory1)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left speaker
To front right speaker
To rear right speaker
To rear left speaker
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Ignition key switch
Car fuse box (Main fuse)
ACC
Car fuse box
Battery
If no connections are made, do not let the wire come out from the tab.
Rear left output (White)
Rear right output (Red)
Power control wire (Blue/White)
Motor antenna control wire (Blue)
Dimmer control wire (Orange / White)
When using the optional power amplifier, connect to its power control
terminal.
To car light control switch
Depending on what antenna you are using, connect either to the
control terminal of the motor antenna, or to the power terminal for the
booster amplifier of the film-type antenna.
External amplifier control wire
(Pink/Black)
To "EXT.AMP.CONT." terminal of the amplifier having the external amp
control function.
Sub Woofer left output (White)
Sub Woofer right output (Red)
To connect the Kenwood navigation system, consult your
navigation manual.
TEL mute wire (Brown)
Connect to the terminal that is grounded when either the telephone
rings or during conversation.
To connect these leads, refer to the relevant
instruction manuals.
To Kenwood disc changer/ External optional accessory
To use the steering wheel
remote control feature,
you need to an exclusive
remote adapter (not
supplied) matches your car
is required.
Steering remote control
(Light Blue/Yellow)
USB connector (1 m)
• Do not remove the cap when you
do not use the USB cable. The
connector will cause the unit to
malfunction if it gets in touch with
any metallic part of the vehicle.
• Fasten the connector with the
tape so that the cable will not
come off.
AUX input (Stereo)
Use the mini-plug which is stereo type and does not
have any resistance.
To USB device
Tape