Filter
Top Products
English
|
11
Display Type Selection
Changing the display mode.
1 Enter Display Type Selection mode
Using the Control knob, select "DISP" > "TYPE".
For the operation method, refer to <Function
Control mode> (page 10).
2 Select the display Type
Turn the Control knob.
Select from the following display types:
Display Mode Display
"TYPE SELECT [A]"
1
2
"TYPE SELECT [B]"
1
2
3
"TYPE SELECT [C]"
6
2
5
4
0
0
0
"TYPE SELECT [D]"
!
6
2
5
4
"TYPE SELECT [E]"
8
2
7
"TYPE SELECT [F]"
9
1 Graphic display part
2 Status display
3 Text display part
4 Upper text display part
5 Middle text display part
6 Lower text display part
7 Text display part
8 Graphic display part
9 G-Analyzer display part
0 Text icon display part
! Source icon display part
3 Exit Display Type Selection mode
Press the Control knob.
⁄
• To change the information by the Display Type, refer
to the page on the following table for the methods to
alternate by the Display Type.
Display Type
ABCDEF
Graphic 1
12 12 — — — —
Status 2
11 11 — — — —
Text 3
—12————
Upper 4
— — 13 13 — —
Middle 5
— — 13 13 — —
Lower 6
— — 13 13 — —
Text 7
————12—
G-Analyzer 9
—————15
Display Type A/ Display Type B
Status Setting
Determine whether the On and Off statuses of
various functions are to be displayed on the Display
Type A/B.
1 Enter Status Setting mode
Using the Control knob, select "DISP" >
"STATUS".
For the operation method, refer to <Function
Control mode> (page 10).
2 Select the Status display
Turn the Control knob.
3 Exit Status Setting mode
Press the Control knob.