Filter
Top Products
English
|
17
⁄
• Like your vehicle’s speedometer, G-Analyzer is no more
than a measuring function. The HP or G value measured
by this unit may not be completely accurate due to its
simplified method of measurement. The G-Analyzer is
only for reference and should not be used to confirm the
horsepower specifications of your vehicle.
• Measuring after starting the car lowers the accuracy.
• The record will not be renewed if the measurement is
discontinued.
• The graph’s scale adjusts automatically to the
horsepower value.
• The value of max power and record can be reset by <G-
Analyzer Reset> (page 17).
Display Type F
G-Analyzer Reset
Resets the value of G-Meter, G-Counter and G-
Analyzer Horsepower Analysis.
1 Enter G-Analyzer Reset mode
Using the Control knob, select "DISP" > "GMA"
> "RESET".
For the operation method, refer to <Function
Control mode> (page 10).
"G-RESET" is displayed.
2 Select the Reset item
Turn the Control knob.
Display Setting
"Meter Reset" Reset the value of G-Meter.
"Power Reset" Reset the value of G-Analyzer Horsepower
Analysis.
"Counter Reset" Reset the value of G-Counter.
3 Determine the item you want to reset
Press the Control knob.
4 Reset the value
Select "YES" using the Control knob.
"Reset OK" is displayed.
5 Exit G-Analyzer Reset mode
Press the [FNC] button.
Display Type F
G-Counter Level seting
Calibrating G-Point. Setting the level according to
the kinds of vehicles.
1 Enter G-Counter Level setting mode
Using the Control knob, select "DISP" > "GMA"
> "LEVEL".
For the operation method, refer to <Function
Control mode> (page 10).
"G-COUNTER LEVEL" is displayed.
2 Select the G-Counter Level
Turn the Control knob.
Display Setting
"Level1" Counter is easy to go up.
"Level2"
…
"Level3" Counter is hard to go up.
3 Exit G-Counter Level setting mode
Press the Control knob.
⁄
• In the case of driving situations calling for few
accelerations, set the G-Point up to "Level1". In the case
of frequent accelerations, set it up to "Level3".