Filter
Top Products
10
|
English
General features
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
Refer to <Selecting the Source> (page 7).
2 Enter Speaker Setting mode
Press the [VOL] knob.
"SP SEL" is displayed.
3 Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting alternates
between the settings shown in the table below.
Speaker type Display
OFF "OFF"
For 5 & 4 in. speaker "5/4inch"
For 6 & 6x9 in. speaker "6x9/6inch"
For the OEM speaker "O.E.M."
4 Exit Speaker Setting mode
Press the [VOL] knob.
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Push the Control knob toward down for at least
2 seconds.
Each time you push the knob, Subwoofer output
switches ON and OFF.
When it is ON, "SUB WOOFER ON" is displayed.
TEL Mute
The audio system automatically mutes when a call
comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <Connecting Wires to
Terminals> (page 47).
Function Control mode
To set up various functions of this unit, select tree-
structured function items.
1 Enter Function Control mode
Press the [FNC] button.
2 Select your desired setup item
Select a setup item using the Control knob.
Operation type Operation
Movement between
items
Turn the Control knob.
Selection of item Press the Control knob.
Return to previous item Press the [FNC] button.
Functions of items are as follows:
Display Icon Function of setup item
"Menu" "MENU" Allows you to set up the environment. Refer
to <Menu system> (page 34).
"Display Select" "DISP" Allows you to set up the display. Refer to
page 11 to page 18.
"Angle Adjust" "ANGLE" Allows you to set the panel angle. Refer to
<Angle Control> (page 19).
"Preset Memory" "P.MEM" Allows you to put stations in the memory.
Refer to <Station Preset Memory> (page
22).
"File Scan" etc. "SCAN"
etc.
Allows you to set how to play the CD and
audio file. Refer to <Play function of CD
and Audio file> (page 28).
"Return"
"
"
Returns to the previous item.
3 Select an option for the selected item
Refer to the related pages for the operation of
each option.
4 Exit Function Control mode
Press the [FNC] button for at least 1 second.