Kenwood KDC-X615 CD Player User Manual


 
Stations whose names have not been stored will be displayed
as frequencies.
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
Once the name is displayed for the station you want to
listen to
Press the OK button.
Reception starts of the displayed station, and the station name
preset play mode ends.
Canceling mode during input:
Press the DNPP button.
The station name preset play mode is canceled.
2
NOTE
Function of the KDC-X615/KDC-6015
You can search for the station for any station if its name has
been preset using Station Name Preset.
Press the DNPP button on the remote.
"SNPP" will be displayed once the station name preset play
mode is entered.
The names of the stations stored in the band currently listened
to are displayed in the following order for five seconds each:
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the 4 button, the station display
switches in the reverse direction.
= FM1 Ô FM2 Ô FM3 Ô AM +
1
Station Name Preset Play (SNPP)
(Function of Remote)
You can change the display used when listening to the radio.
Changing the Display:
Each time you press the DISP button, the display changes as
follows:
The £ indicator lights while the clock is displayed.
NOTE
Station frequency
SNPS name (only when being preset)
Clock
Date
Switching Display for Tuner
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
— 15
KDC-X615_U.S_K_r6 00.12.26 3:45 PM Page 15