Filter
Top Products
36
EN
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model Serial Number
Specifications
(For Australia)
Caution: Read this page carefully to ensure safe
operation.
AUDIO section
Rated power output during STEREO operation
DIN/IEC (63 kHz ~ 12.5kHz, 0.7% T.H.D., at 8 Ω)
............................................................................... 100 W + 100 W
Effective power output during STEREO operation
RMS (1 kHz, 10 % T.H.D. at 8 Ω) .............................
120 W + 120 W
Effective power output during SURROUND operation
FRONT
(1 kHz, 0.7% T.H.D. at 8Ω one channel driven) .....
100 W + 100 W
(1 kHz, 10% T.H.D. at 8Ω one channel driven) ......
120 W + 120 W
CENTER
(1 kHz, 0.7% T.H.D. at 8Ω one channel driven) ........................
100 W
(1 kHz, 10% T.H.D. at 8Ω one channel driven) .........................
120 W
SURROUND
(1 kHz, 0.7% T.H.D. at 8Ω one channel driven) .....
100 W + 100 W
(1 kHz, 10% T.H.D. at 8Ω one channel driven) ......
120 W + 120 W
SURROUND BACK (KRF-V6100D)
(1 kHz, 0.7 % T.H.D. at 8 Ω one channel driven) ...................
100 W
(1 kHz, 10 % T.H.D. at 8 Ω one channel driven) ....................
120 W
Total harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8Ω)
Frequency response (IHF’66)
CD/DVD ......................................20 Hz ~ 70 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
CD/DVD ................................................................................. 95 dB
Input sensitivity / impedance
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 47 kΩ
DVD/6CH INPUT................................................. 550 mV / 15 kΩ
Output level / impedance
MD TAPE REC ........................................................ 550 mV / 1 kΩ
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩ
PRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 kΩ
Tone control
BASS................................................................ ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)
Loudness control
VOLUME at -30dB level................................... +8 dB (at 100 Hz)
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nm
Coaxial................................................................... 0.5 Vp-p / 75 Ω
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ................................................. 1 Vp-p / 75 Ω
S-VIDEO inputs /outputs (KRF-V6100D)
S-VIDEO (luminance signal) .................................. 1 Vp-p / 75 Ω
S-VIDEO (chrominance signal) .......................0.286 Vp-p / 75 Ω
COMPONENT VIDEO inputs/outputs (KRF-V6100D)
COMPONENT VIDEO (luminance signal) ............... 1 Vp-p/75 Ω
COMPONENT VIDEO (CB/CR-signal)................... 0.7 Vp-p/75 Ω
FM tuner section
Tuning frequency range................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)
...................
1.6 µV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO .....................................................28 µV (75 Ω)/ 40.2 dBf
Total harmonic distortion (1 kHz)
MONO..........................................................0.5% (71.2 dBf input)
STEREO .......................................................0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO........................................................ 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)
Stereo separation (1 kHz) ........................................................... 40 dB
Selectivity (±400 kHz) ................................................................. 50 dB
Frequency response .................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range..................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20dB) .........16 µV / (600 µV/m)
Signal to noise ratio (30% mod., 1 mV input)
.......................................................... 50 dB (60 dBµV EMF input)
GENERAL
Power consumption ................................................................... 280W
Standby Power consumption ................................... less than 1.3 W
AC outlet
SWITCHED ................................................ 1 (total 90 W max.)
Dimensions....................................................W : .440 mm (17-5/16")
H : 143 mm (5-5/8")
D : 303 mm (11-15/16")
Weight (Net)..................................................................7.8 kg (17.2 lb)
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
100 watts per channel minimum RMS, both channels driven, at 8 from
40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)
5632_33-36_EN 06.4.20, 2:01 PM36