Kenwood B60-5632-00 00 MA (E, X) AP 0602 Stereo System User Manual


 
35
EN
Specifications
(For Europe)
AUDIO section
Rated power output during STEREO operation
DIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 )
............................................................................... 100 W + 100 W
Effective power output during STEREO operation
RMS(1 kHz, 10% T.H.D., at 6 ) ..............................
120 W + 120 W
Effective power output during SURROUND operation
FRONT
(1 kHz, 0.7 % T.H.D. at 6 one channel driven) ...
100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 one channel driven) ....
120 W + 120 W
CENTER
(1 kHz, 0.7 % T.H.D. at 6 one channel driven) ...................
100 W
(1 kHz, 10 % T.H.D. at 6 one channel driven) ....................
120 W
SURROUND
(1 kHz, 0.7 % T.H.D. at 6 one channel driven) ...
100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 one channel driven) ....
120 W + 120 W
SURROUND BACK (KRF-V6100D)
(1 kHz, 0.7 % T.H.D. at 6 one channel driven) ...................
100 W
(1 kHz, 10 % T.H.D. at 6 one channel driven) ....................
120 W
Total harmonic distortion .........................0.05 % (1 kHz, 50 W, 6 )
Frequency response (IHF66)
CD/DVD .....................................20 Hz ~ 70 kHz, +0 dB ~ 3.0 dB
Signal to noise ratio (IHF66)
CD/DVD ................................................................................. 95 dB
Input sensitivity / impedance
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 47 k
DVD/6CH INPUT.................................................. 550 mV / 15 k
Output level / impedance
MD/TAPE REC ....................................................... 550 mV / 1 k
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 k
PRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 k
Tone control
BASS................................................................ ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)
Loudness control
VOLUME at 30 dB level ...................................... +8 dB (100 Hz)
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical ........................... (15 dBm ~ 21 dBm), 660 nm ±30 nm
Coaxial................................................................... 0.5 Vp-p / 75
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ................................................. 1 Vp-p / 75
S-VIDEO inputs /outputs (KRF-V6100D)
S-VIDEO (luminance signal) .................................. 1 Vp-p / 75
S-VIDEO (chrominance signal) .......................0.286 Vp-p / 75
COMPONENT VIDEO inputs /outputs (KRF-V6100D)
COMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75
COMPONENT VIDEO (CB/CR-signal)................. 0.7 Vp-p / 75
FM tuner section
Tuning frequency range................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity (DIN at 75 )
MONO.....................1.3 µV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ...................45 µV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO.......................................................... 0.2% (71.2 dBf input)
STEREO .......................................................0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO................................. 65 dB (40 kHz DEV., 71.2 dBf input)
STEREO .............................. 60 dB (46 kHz DEV., 71.2 dBf input)
Stereo separation (DIN 1 kHz) ................................................... 36 dB
Selectivity (±300 kHz) ................................................................. 64 dB
Frequency response (30 Hz ~ 15 kHz) .................... +0.5 dB, 3.0 dB
AM tuner section
Tuning frequency range.................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB) ........16 µV / (600 µV/m)
Signal to noise ratio (30% mod., 1 mV input)
.................................................................. 50 dB (60 dBµV EMF input)
GENERAL
Power consumption ................................................................. 280 W
Standby Power consumption ................................... less than 0.9 W
AC outlet
SWITCHED ......................................................2 (total 90 W max.)
Dimensions.................................................... W: 440 mm (17-5/16")
H : 143 mm (5-5/8")
D : 303 mm (11-15/16")
Weight (Net) .............................................................. 7.8 kg (17.2 lb)
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Caution: Read this page carefully to ensure safe
operation.
5632_33-36_EN 06.4.20, 2:01 PM35