Kenwood B60-5632-00 00 MA (E, X) AP 0602 Stereo System User Manual


 
21
EN
Recording audio (analog sources)
INPUT SELECTOR
Recording
3 Press and hold the DIMMER key for more than 2 seconds to select
the A-REC or M-REC mode during digital input.
1 Rec mode off : The digital input record mode is switched off.
2 A-REC mode : The digital input signals (DTS, Dolby Digital,
or PCM) are identified automatically and
converted into stereo signals that are ready
for recording.
3 M-REC mode : The input signal type at the moment this
mode is selected is held throughout this
mode.
When the M-REC mode is selected, the digital input signal is
converted to stereo signals (down-mix). But once the digital signal
is changed to other signal, no signal is output.
When the A-REC mode is selected, the digital input signal is
converted to stereo signals even if the digital signal is changed.
For A-REC mode:
For M-REC mode:
4 Start playback, then start recording.
If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
Recording a music source
1 Use the INPUT SELECTOR knob to select the source (other than
MD/TAPE) you want to record.
2 Set the MD or TAPE recorder to record.
3 Start playback, then start recording.
Recording video
1 Use the INPUT SELECTOR knob to select the video source (other
than VIDEO1) you want to record.
2 Set the video deck connected to VIDEO 1 to record.
Select the REC MODE to record a digital input source.
3 Start playback, then start recording.
Recording may not be normal for some video software. This is due to
the copy guard condition.
Recording audio (digital sources)
Switch on the REC mode to record a digital input source.
Usually use the A-REC (Auto-Record) mode to record audio input
sources. When the digital mode changes during recording in the A-REC
mode, the audio input source may be interrupted momentarily.
Recording music in A-REC or M-REC mode
DIMMER
INPUT SELECTOR
1 Use the INPUT SELECTOR knob to select the source (CD/DVD,
DVD/6CH or VIDEO2) you want to record.
2 Set the MD or TAPE recorder to record.
5632_16_25_EN 06.4.20, 2:00 PM21