Kenwood B60-5632-00 00 MA (E, X) AP 0602 Stereo System User Manual


 
29
EN
Ambience effects
DVD 6-channel playback
Using a DVD player or the like equipped with six (5.1) output channels and
this model, you can enjoy surround sound playback.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
DVD/6CH
INPUT SELECTORINPUT MODE
Preparations
Connect your DVD player to the DVD/6CH INPUT jacks of this
model.
Turn on all other components that will be used.
Complete Preparing for surround sound. ^
1
Select DVD/6CH as the input source.
2
Select 6CH INPT by pressing the INPUT MODE key.
3
Start playback of the DVD software.
4
Adjust the volume.
It is not possible to adjust the volume level or sound quality (SETUP,
SOUND, LISTEN MODE, ACTIVE EQ and TONE keys will not be
functional) of the channels separately when this model is in the
6CH INPUT mode. Adjust the volume with the controls of the DVD
player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofers own volume control.
0 ARENA : DSP Surround ARENA mode.
- JAZZ CLUB : DSP Surround JAZZ CLUB mode.
= THEATER : DSP Surround THEATER mode.
~ STADIUM : DSP Surround STADIUM mode.
! DISCO : DSP Surround DISCO mode.
@ STEREO : Normal stereo playback.
Dolby Digital or DTS signal having more channels than the maximum
number of playback channels available using this models current
settings is input, downmixing is performed to match the number of
available channels.
3
Adjust the volume.
Notes
Depending on the type of the signal or speaker setting, some
listening modes cannot be selected.
When playback is started, the sound may be cut or interrupted
before the input source is confirmed as Dolby Digital.
To enjoy Dolby Digital surround (as well as all the other listening
modes) from a single component, be sure to use a Dolby Digital
compatible source component.
5632_26_32_EN 06.4.20, 2:01 PM29