Filter
Top Products
34
EN
In case of difficulty
Remote control unit
Cause
• The remote control is set to the DVD player
operation mode.
• Batteries are exhausted.
• The remote control unit is too far away from
the main system, controlling angle is too
large, or there is an obstacle between this
model and the remote.
• The remote control has not been changed to
the operation mode for the KENWOOD DVD
player you wish to control.
Symptom
Remote control operation is not possible.
Remedy
• Press any of the Input Selector keys to select
the appropriate operation mode.
• Replace with new batteries.
• Operate the remote control unit within the
controllable range. 4
• Press the CD/DVD or DVD/6CH key to activate
the operation mode for the component you
want to control before operation. ¤
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may
cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction. Be
specially careful not to use contact cleaners containing oil, for they
may deform the plastic component.
5632_33-36_EN 06.4.20, 2:01 PM34