Kenwood KR-V9090 Stereo Receiver User Manual


 
21
Operations
KR-V9090/8090 (En/T)
6CH.INPUT playback (KR-V9090 only)
This function allows you to pair the video signal input to the VIDEO 2 VIDEO jack with audio signals input to the 6CH.INPUT jacks. 9
1 Set the INPUT SELECTOR to VIDEO 2.
2 Hold down the AUTO key for more than
2 seconds.
INPUT SELECTOR
Normal playback
AUTO
•When the receiver is set to this mode, it functions as a multi-channel
amplifier (the surround effects (etc.) cannot be activated).
•The sound of the front channel is output from the SPEAKERS A only.
•The receiver switches to the multi-channel amplification mode auto-
matically whenever VIDEO 2 is selected.
•To undo this setting and listen to the audio signals input to the VIDEO
2 AUDIO jacks, repeat this procedure so that "M.INPUT" goes out.
Listening with a graphic equalizer
Hold down the DIMMER key for more
than 2 seconds.
DIMMER
A
SP.
ADPT ON
B
Appears for a few seconds after the adaptor input is
turned on.
•When the receiver is set to this mode, the audio signals are looped
through the graphic equalizer connected to the ADAPTOR OUT and IN
jacks on the rear panel. 9
•When the adaptor is on, the overall volume is slightly decreased.
•To undo this setting, repeat this procedure to display "ADPT OFF".
AUDIO
SHIFTMACRO
TVVIDEO
GUIDEREC
MUTE
VOLUMETUNING/SKIP
THEME FAVMENU
FUNCTION
SHIFT
SETUP
INFO ALT AUDTV/SAT/VID
REPEAT RANDOM+100
DISPLAY
ENT+10
LISTEN
MODE
SOUNDSUBWOOFER
564
231
897
0
8
7
6
BAND
P. CALL P. CALL
PHONES
1234567890
STANDBY
MUTE
LEVEL
INDICATOR
DIRECTMEMORY
ABSPEAKERS
AUTO
CENTER MODE
TUNING BASS TREBLEBAND
LEVEL CONTROL
PRO LOGIC 3 STEREO
STEREO DSP
LOUDNESSSOURCE DIRECT
DIMMER
INPUT SELECTOR VOLUME CONTROL
VIDEO
ON/STANDBY
DOWN UP
AV AUX
L
-
AUDIO
-
R
MUTE
TA/NEWS/INFO. PTY DISPLAY
+10/
PTY SEARCH
POWER
-ONOFF
AUDIOVIDEO SURROUND RECEIVER KR-V9090
TRAITR
thermally reactive advanced instantaneous transistor
POWER
Keys or controls used in this operation.
A
SP.
VIDEO2
B
VIDEO2
M. INPUT
Lights