Filter
Top Products
26
English
5 Select and enter the track.
6 Repeat steps 4 and 5 (this procedure can be repeated for up to
16 tracks).
• The tracks on the MD alone or only the tracks on the CDs can be programmed also.
7 Press the £ button to start MIX PROGRAM play.
Operation stops automatically when all the programmed tracks have been played. The same operating
procedure is followed for programs 2 and 3.
• To return the program mode to the normal status in the stop mode
Recording onto MDs
Types of recording —————————————————————
The following 5 types of recording are possible with this unit.
• Manual recording (page
28
)
One of the recording sources is selected, and its material is recorded.
• DIGITAL
• CD (CD1–CD3)
• LINE
• MIC
• CD recording (single-action recording) (page
29
)
CD recording is initiated by a single action: just press the CD REC button.
• CD recording (1st TRACK recording) (page
30
)
When the 1st TRACK REC button is pressed, only the first tracks on CD1, CD2 and CD3 are
recorded. You can compile your own album of original hit numbers.
• CD recording (LISTENING EDIT recording) (page
31
)
When the LISTENING EDIT button is pressed, only the tracks you want to hear can be programmed
and recorded.
• Mixing recording (page
32
)
This enables mixing recording for CD + LINE, CD + MIC or LINE + MIC.
1 Select the track. 2 Enter the selection.
Read through this section
before recording.
PLAY MODE
• Repeatedly press this until the play time
appears in the display window.
• The play time display appears when
this button is pressed.
SET
Remote control
Main unit
07/p24-33 (E) 4/2/98, 1:27 PM26