Filter
Top Products
21
English
When the MD has been placed inside ———————————
• To eject the MD
Press the MD 0 button. “MD EJECT” appears in the display window, and the MD is ejected.
The
MD
display is cleared.
The MD can be ejected even when the power is off. In this case, as soon as the MD is ejected, the
power is automatically turned off.
Precaution concerning volume setting
Unlike analog records, MDs have very low levels of noise. If you set the volume on the basis of the
level of noise heard during the intro as you might with an analog record, an unexpectedly loud sound
may be delivered as a result. Before turning off the power, turn down the volume to prevent this from
happening.
If there is no MD inside the unit, “MD NO DISC” is displayed when the function is set to “MD” or
the 6 button is pressed.
Changing the display in the display window ———————
• Use the DISPLAY/CHARA button (or the DISPLAY MODE button on the remote control). Each
time it is pressed, the display changes as shown below.
• When it is pressed in the stop mode
• When it is pressed during play
<Tips and Precautions>
• To ensure that the MD sound remains perfect
Each MD disc is housed inside a cartridge which protects it from dust and dirt and which ensures easy
handling. However, bear in mind the following precautions to ensure that its sound remains perfect.
Do not open the shutter!
The shutter is locked to prevent it from opening. Forcing it open will break the disc.
MD
/CHARA
DISPLAY
/CHARA
DISPLAY
Play time of track No.1
«
Play time of all the tracks
«
Remaining time (REMAIN) : “0:00” appears for a play-only MD.
«
Disc name : “NO TITLE” appears when the disc name of the MD has not
been recorded.
Elapsed time of track being played
«
Track name : “NO TITLE” appears when the track name has not been
recorded.
\
\
• When the button on the left is pressed,
the power turns on, and play starts.
Lamp
lights.
Main unit
Remote control
06/p20-23 (E) 4/1/98, 4:43 PM21