Filter
Top Products
18
Other Play Methods
Program play
You can program up to 64 tracks in any desired order
including the same tracks.
For Audio CD, go to step 3. Though the display differs a
little, operation is the same.
1 (MP3 only) During playback or in stop mode,
press PROGRAM.
a “PROG” lights up
b Group number
c Program sequence number
2 (MP3 only) Select the desired group num-
ber. (e.g. 02)
3 Press PROGRAM.
d Track number
4 Select the desired track. (e.g. 03)
5 Press PROGRAM
6 For MP3, repeat steps 2-5 to select other
tracks.
For Audio-CD, repeat steps 4 and 5.
7 Press the 6 button.
7 To confirm the programmed tracks
In stop mode, press PROGRAM repeatedly. The pro-
grammed track number will successively appear together
with the program sequence number. At this time, you
can change the program, if required.
If the programmed tracks are less than 64, track number
“00” appears for the youngest programmable sequence
number, enabling further programming.
7 To delete the entire programmed sequence
In stop mode, press the 7 button during programming
process. Turning off the unit will also delete the program.
6
(For Audio CD)
Repeat steps 4 and 5 to program all the de-
sired tracks.
(Para CD de audio)
Repita los pasos 4 y 5 para programar todas
las melodías deseadas.
(Voor audio-CD)
Herhaal stappen 4 en 5 om alle gewenste mu-
ziekstukken te programmeren.
(For MP3)
Repeat steps 2-5 to program all the desired
tracks.
(Para MP3)
Repita los pasos 2-5 para programar todas
las melodías deseadas.
(Voor MP3)
Herhaal stappen 2-5 om alle gewenste muziek-
stukken te programmeren.
XL-PM20(en,sp,du)p03-19.p65 17/05/2002, 03:10 pm18