JVC XL-PM20SL CD Player User Manual


 
12
Sequential Play
Basic Play
This CD player can play back both Audio CDs and MP3
files (tracks).
1 Firmly connect the plug into the jack.
2 Slide OPEN 3 to open the lid, and insert
the disc.
a Label must face upward.
Press the area near the center hole of the disc
until it clicks into position.
b Close the lid.
3 Release the hold mode.
4 Turn down the volume.
5 Press 3/8.
Play now starts.
c Track number in play
d Elapsed playing time of each track
e Shows Audio-CD
f Shows MP 3
g Group number in play
Play stops automatically when all the tracks have
been played.
6 Adjust the volume level.
For your reference:
This indication appears for about 30 seconds if the 3/8
button is pressed when no disc is loaded in the unit or if
the disc is not properly seated. Then, the unit is auto-
matically shut off.
This indication appears to let you know the status of the
unit.
Preparation period before playing the track
MP3 flashes for several seconds after you have press
the 3/8 button to play the disc.
(Flashes until the rotational speed of disc becomes
constant or until the contents of disc is read.)
Opened lid
Stays lit for 30 seconds when the lid is opened.
Note:
Never insert foreign objects into the body.
Auto power off function
If the unit is left in stop mode for 30 seconds, the
unit powers itself off automatically to save power.
XL-PM20(en,sp,du)p03-19.p65 17/05/2002, 03:09 pm12