JVC UX-QD70S Stereo System User Manual


 
Introduction
39
(Continued)
Playing Back MP3/WMA and JPEG Discs
4 Press to select a track.
5 Press or .
Example: For MP3 (during playback)
• At first, a track title (file name) is scrolled.
• When an MP3 or WMA is loaded, tag information
(title/artist/album) is scrolled followed by a track
title.
• Only alphanumerical one-byte characters are
displayed properly as a track title or tag informa-
tion.
NOTE
You can also use in step 2 on page 38.
You can also use t
he number buttons in step 4. In
this case, steps 3 and 5 are not needed. Refer to
“Using the number buttons” ( page 16).
You can also use or in step 4. In
this case, step 3 on page 38 is not needed.
For the locations of remote control
buttons, refer to page 38.
Group number Track number
Elapsed playing time
(This indicator is not displayed
while a JPEG is loaded.)
Slide-show playback
• For a JPEG disc, when you press in step
5, files are continuously played back from the
selected file (slide-show playback). When you
press
, only a selected file is played back.
• A file is displayed for approximately 3 seconds
in a slide-show playback.
• After all files are played back, the playback is
automatically stopped.
UX-QD70[UB]-04.fm Page 39 Wednesday, August 17, 2005 3:45 PM