Filter
Top Products
Introduction
21
(Continued)
Listening to Radio Broadcasts
You can store up to 30 FM radio stations and up to
15 AM radio stations.
■While the broadcast from the radio station
you want to preset is being received
1 Set the remote control mode
selector to AUDIO.
2 Press .
• The preset number flashes for approxi-
mately 5 seconds.
3 While the preset number is flash-
ing, press the number buttons
( - or ) to select the pre-
set number you want to use.
• Refer to "Using the number buttons"
( page 16).
• You can also select the preset number by
pressing or .
4 While the selected number is
flashing, press or .
• "STORED" appears and the selected radio
station is stored.
NOTE
• The type of FM reception (stereo/monaural) is also
stored
( page 20).
• When you store a radio station to a preset num-
ber to which another radio station has previously
been stored, the newly set radio station replaces
the previously stored radio station.
■
While an FM or AM broadcast is being received
1 Set the remote control mode
selector to AUDIO.
2 Use the number buttons to select
the preset number of the radio sta-
tion to which you want to tune in.
• Refer to "Using the number buttons"
( page 16).
• You can also select the preset number by
pressing or .
You can enter the name of a stored radio station
using up to 8 characters.
1 Set the remote control mode
selector to AUDIO.
2 Press .
3 Entering a radio station name with
or the number buttons ( -
or ).
• To enter radio station names, refer to "Enter-
ing Titles" ( page 59).
4 Press .
• "STORED" appears in the display window
and the entered radio station name is
registered.
NOTE
• When you store a radio station after you have
entered a radio station name, the entered radio
station name with the same preset number is
erased.
• You cannot enter radio station names after
selecting a radio broadcast with or .
Press .
• Each time you press , the display
changes as follows.
For the locations of remote control
buttons, refer to page 20.
Storing Radio Stations (Preset)
Tuning In to a Preset Radio Station
Changing the Display in the
Display Window
Entering radio station names
Display while a radio
broadcast is being
received
( step 1 on page 20)
(Time display)
Clock display
(With an MD loaded)
Display of remaining
time for MD recording
UX-QD70[UB]-03.fm Page 21 Wednesday, September 21, 2005 10:20 AM