JVC UX-QD70S Stereo System User Manual


 
20
English Basic Operations/Listening to Radio Broadcasts English
Basic Operations/Listening to Radio Broadcasts
Listening to Radio Broadcasts
This product can receive FM and AM radio broad-
casts.
CAUTION
Set the remote control mode selector to
AUDIO before using the number buttons.
Some countries space AM stations 9 kHz apart,
and other countries use 10 kHz spacing.
On the main unit ONLY:
When the main unit is turned off
To select 10 kHz spacing, while holding down
on the main unit, press on the main
unit to turn on the power. "AM 10 kHz SP" appears
in the display window.
To select 9 kHz spacing, while holding down
on the main unit, press on the main
unit to turn on the power. "AM 9 kHz SP" appears
in the display window.
NOTE
If the spacing is switched, the memory in which the
radio stations were stored will be erased.
1 Press to select "FM" or "AM".
Example: While an FM radio broadcast is
received
2 Press or repeatedly to
select a radio station (frequency).
• You can also select a radio station using the
automatic tuning.
• When the main unit has received an FM
stereo broadcast, "STEREO" lights up.
Setting the AM Tuner Spacing
Number buttons
Remote control
mode selector
Selecting a Radio Station
Stereo indicator
Preset number ( page 21)
Frequency
Automatic tuning:
Hold down or until the frequency
starts changing, and then release the button.
When the main unit has received a broadcast,
the frequency automatically stops changing.
To quit the function while searching for a
broadcast, press or .
Switching the FM reception (stereo/
monaural):
If an FM stereo broadcast is difficult to hear
because of noise, you may be able to hear
more easily by pressing to switch
the sound to monaural reception. In this
case, "MONO" lights up. To return the sound
to stereo reception, press again.
UX-QD70[UB]-03.fm Page 20 Wednesday, August 31, 2005 10:49 AM