Filter
Top Products
English
– 15 –
On Screen Display (OSD) for a CD/VCD
If you insert a CD/VCD, your TV screen will serve as an
additional display for messages (such as PLAY, STOP, etc.)
and information stored on the VCD/CD.
Press OSD/DIM repeatedly to select
the information to display.
The current track number and the
current/remaining time of the track/disc
appear on the display.
Playing a VCD with PBC
When you load a VCD with PBC (Playback Control) in the
disk compartment, the PBC indicator appears on the display.
The PBC provides a play sequence predefined for the VCD.
1 Switch on the TV, then load a VCD with PBC.
A menu appears on the TV screen.
• If the menu consists of a list of titles, you can select the
desired title directly.
2 Press the number buttons on
the remote control to make
selection.
The VCD starts playing the selected
menu item automatically.
• If the menu consists of more than one
page, press 4 or ¢ to go through
the pages.
To return to the previous menu level
Press RETURN on the remote control.
To switch off the PBC function
Press PBC on the remote control.
Alternatively, press 7.
“PBC OFF” appears briefly on the TV screen
and the PBC indicator goes off.
• The PBC function is automatically switched off when you
activate the shuffle play or VIEW function, or program
tracks.
The menu structure depends on the program stored on the
VCD. Refer to the information supplied with the disc.
Various VCD Operations
PAUSE
During playback, press 3/8 to have a still picture
on the TV screen.
The sound will be muted.
“PAUSE” appears briefly on the TV screen.
To continue playback, press 3/8 again.
GO TO
This function allows you to start playback at the desired time
point on the disc.
• To use the GO TO function, you need to switch off PBC
beforehand.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
1 Press GO TO on the remote control.
“GO - -:- -” appears on the display.
2 Press the number buttons on the remote control to enter
the disc time at which to begin playback.
• The disc time entered should not be greater than the total
disc time.
SLOW
Press SLOW on the remote control repeatedly to
watch a VCD at a slower speed.
With each press, the playback speed changes as
follows:
SLOW
1
/2 SLOW
1
/4
SLOW
1
/8PLAY
• The sound is muted.
To resume playback at normal speed, press 3/8.
Alternatively, press SLOW repeatedly until “PLAY” appears
on the TV screen.
PBC
PLAY/PAUSE
GOTO
SLOW
OSD/DIM
123
456
789
0+10
RETURN