Filter
Top Products
English
– 13 –
Playing Back a Disc
1 Load a disc.
• See “Loading a Disc” on the previous page.
2 Press 3/8 to start playback.
The track number and elapsed playing time
of the current track appear on the display.
3 To stop playback, press 7.
To interrupt playback
Press 3/8.
The playing time starts blinking.
To resume playback, press 3/8 again.
To select a desired track (for CD and VCD)
Press 4 or ¢ repeatedly until the
desired track appears on the display (or
press the number buttons on the remote
control).
• If you use the number buttons to select a track, playback
will start immediately without your pressing 3/8.
To search for a particular point during playback (for
audio CD only)
Press and hold 4 or ¢ to locate the
desired point on the disc.
To search for a particular scene during playback (for
VCD only)
1 Press and hold 4 or ¢ until the search
speed indication appears on the TV screen.
Each time you do this, the search speed
changes as follows:
2 When you locate the desired scene, press 3/8.
To select a desired album (for MP3-CD only)
In stop mode, press and hold 4 or
¢ until the desired album number
appears on the display.
“ALBUM” and the album name scroll through
the display briefly.
On the TV screen, the arrow moves up/down in the album
list.
To select a desired track (for MP3-CD only)
In stop mode, press 4 or ¢
repeatedly (or press the number buttons
on the remote control) to select a desired
track from the current album.
The track name scrolls through the display briefly.
On the TV screen, the arrow moves up/down in the track list
of the current album.
Press 3/8 to start playback.
• If you use the number buttons to select a track, playback
will start immediately without your pressing 3/8.
Program Play of a CD/VCD
You can arrange the order in which the tracks are played
before you start playing. You can program up to 20 tracks.
1 In stop mode, press PROGRAM.
The PROG. indicator and the current
selected track number start blinking.
2 Press 4 or ¢ repeatedly (or
press the number buttons on the
remote control) to select the
desired track.
3 Press PROGRAM to store
the selected track.
“PXX OK” appears on the display and TV screen.
4 Repeat steps 1 to 3 to store other tracks.
• When programming tracks of a VCD with PBC, the PBC
function is automatically switched off.
• You cannot program more than 20 tracks. If you attempt to
do it, “PRG FULL” will flash on the display.
To play the programed tracks
Press 3/8.
• During program play, you can press 4 or ¢ to select
the desired track in the program.
If you press REPEAT/DEMO during program
play
The current track or all programed tracks are
played repeatedly.
To review the programed sequence
Press 4 or ¢ repeatedly after pressing
7 in program play mode.
The program number and track number are
displayed in succession.
PLAY/PAUSE
STOP/CLEAR
SEARCH/TUNING
SEARCH/TUNING
SEARCH/TUNING
SEARCH/TUNING
SEARCH/TUNING
PROGRAM
SEARCH/TUNING
SEARCH/TUNING
DEMO
REPEAT
PLAY/PAUSE
PLAY/PAUSE