Filter
Top Products
59
SPK. SETTING menu
200Hz
SPK. SETTING
CROSS OVER
LEVEL
SIZE
DISTANCE
RETURN TO INITIAL
USE TO SELECT, USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER
SELECT
¶ SIZE
Select this to enter the SIZE sub-
menu.
• You can also set the speaker
sizes using SETTING/ADJUST
button on the remote control
(see page 28).
SMALL
SIZE
FRONT SPEAKER
CENTER SPEAKER
SURROUND SPEAKER
SMALL
SMALL
SURROUND BACK SPEAKER
SMALL
SUB WOOFER
USE
Select one of the sizes for each speaker.
LARGE : Select when the cone speaker size is larger
than 12 cm.
SMALL : Select when the cone speaker size is smaller
than 12 cm.
NONE :(Only for “SURROUND BACK SPEAKER”)
Select when no speaker is connected.
CAUTION:
When using the supplied speakers, select “SMALL” for
each. Selecting “LARGE” will damage the speakers.
NOTES:
• If you have selected “SMALL” for the front speakers, you cannot
select “LARGE” for the center, surround, and surround back
speakers.
• If you have selected “SMALL” for the surround speakers, you
cannot select “LARGE” for the surround back speaker.
SUB WOOFER
This item fixed to “USE.”
To go back to the SPK. SETTING menu
Press Cursor 3/2.
Speaker diagram
Left front
speaker
Subwoofer
Center speaker
Right front
speaker
Right surround
speaker
0dB
LEVEL
CENTER SPEAKER
SURROUND LEFT SPEAKER
TEST TONE
SURROUND RIGHT SPEAKER
0dB
0dB
SUB WOOFER
SURROUND BACK SPEAKER
0dB
0dB
3.0m
DISTANCE
FRONT SPEAKER
CENTER SPEAKER
SURROUND SPEAKER
TEST TONE
3.0m
3.0m
SURROUND BACK SPEAKER
3.0m
Left surround
speaker
Surround back
speaker
¶ LEVEL
Select this to enter the LEVEL
sub-menu.
•You can also select sound
output levels using the number
buttons on the remote control
(see pages 18 and 36).
Adjust the output level within the range of –10 dB to
+10 dB for each speaker in 1 step interval.
You can also adjust the speaker output levels checking the
test tone from each speaker.
•Adjust the speaker levels so that you can hear the sound
through all the speakers at the same level.
TEST TONE
Select this to start or stop the test tone.
To go back to the SPK. SETTING menu
Press Cursor 3/2.
NOTES:
• When “NONE” is selected for the surround back speaker, the test
tone does not come out of the surround back speaker and you
cannot adjust the surround back speaker’s output level.
• The test tone for the subwoofer does not output.
¶ DISTANCE
Select this to enter the
DISTANCE sub-menu.
• You can also set the distance
from your listening point using
SETTING/ADJUST button on
the remote control (see page
29 for details).
Set the distance from the listening point to each
speaker with the range of 0.3 m to 9.0 m (in 0.3 m
interval).
TEST TONE
Select this to start or stop the test tone.
To go back to the SPK. SETTING menu
Press Cursor 3/2.
NOTES:
• If you have selected “NONE” for the surround back speaker, you
cannot set the speaker distance for the surround back speaker.
• When “NONE” is selected for the surround back speaker, the test
tone does not come out of the speaker.
• The test tone for the subwoofer does not output.
TO BE CONTINUED ON THE NEXT PAGE
EN54-63.TH-A75R [B]_f 02.9.5, 7:31 PM59