Filter
Top Products
25
To stop while recording, press 7.
The tape stops after 4 seconds.
To remove the cassette, press 0 on the unit.
When recording discs
A 4-second blank is automatically made on the tape before each
track. To record without the blank, follow the procedure below:
1
Load discs you want to record into the 5-CD Changer.
2
Select the disc number you have loaded.
On the remote control:
Press
DISC UP or DISC DOWN when the current playing
source is the CD player.
On the unit:
Press DISC SELECT repeatedly.
3
Press 3/8 CD twice so that disc playback is paused.
• If the pausing position is not “0:00,” you can skip back to
“0:00” by pressing 4 (or 4 DOWN on the unit).
4
Press REC to start recording.
When all loaded discs are recorded, recording will stop.
You cannot exchange a disc while recording another disc.
Pressing CD REC MODE changes the disc playback mode to
Continuous Play and cancels the Repeat Play mode.
All Discs Synchronized Recording
1
Insert a recordable cassette into the cassette
compartment with the exposed part of the
tape facing left.
2
Load discs into the 5-CD Changer.
• If the current playing source is not the CD player, press
3/8 CD, then 7 before going to the next step.
• You can make a program (see page 19) or select the
Random Play mode (see page 20) if you want. In this
case, you cannot select the starting disc
= go to step
5
.
3
Select the disc number you want to start
recording from.
On the remote control:
Press DISC UP or DISC
DOWN.
On the unit:
Press DISC SELECT repeatedly.
4
Press CD REC MODE on the remote
control to select “ALL CD.”
Each time you press the button, the recording
mode changes as follows:
5
Press REC.
The
REC
indicator lights up on the display and
recording starts.
When all loaded discs are recorded, recording will stop. Both
the 5-CD changer and the cassette deck stop automatically.
CD REC
MODE
1 CD ALL CD 1ST TRACK
CD
1
2
3
4
5
CD
REC
1
2
3
4
5
Elapsed playing timeCurrent track number
REC
DISC UP
DISC DOWN
DISC
SELECT
CD
23_26UX_B70[B].p65 03.4.15, 8:19 PM25