JVC SP-UXB70 Stereo System User Manual


 
8
To remove the speaker grilles
The speaker grilles are removable as illustrated below:
To remove the speaker grille, insert your fingers at the top
of the speaker grille, then pull towards you. Also pull the
bottom towards you.
To attach the speaker grille, follow the illustration above.
Connecting Other Equipment
You can connect audio equipmentused only as a playback
device.
DO NOT connect any equipment while the power
is on.
DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
To play the other equipment through this unit, connect
between the audio output jacks on the other equipment and
AUX/DVD jacks by using audio cords (not supplied).
NOW you are ready to plug in the unit and any
other connected equipment.
IMPORTANT:
Be sure to check that all connections have been made
before plugging in the power cord.
Putting the Batteries into the Remote Control
Insert the batteriesR6(SUM-3)/AA(15F)into the remote
control by matching the polarity (+ and ) on the batteries
with the + and marking on the battery compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.
DO NOT use an old battery together with a new
one.
DO NOT use different types of batteries together.
DO NOT expose batteries to heat or flame.
DO NOT leave the batteries in the battery
compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, the remote control will be damaged
from battery leakage.
1
2
3
R6(SUM-3)/AA(15F)
Speaker grille
Projections
Holes
RIGHT
LEFT
AUX/DVD
To audio output
Audio equipment
06_08FUX_B70[B].p65 03.3.25, 2:14 PM8