Filter
Top Products
45
When a JVC-manufactured TV with AV COMPU
LINK II or III terminals is connected to the DVD
player using these terminals, operating either the
TV or the DVD player controls the other equipment
at the same time.
NOTE
• “AV COMPU LINK” is printed for terminals on some
JVC-manufactured TVs. These terminals are no
different from the “AV COMPU LINK I/II” or “AV
COMPU LINK” terminal.
• Refer to “OTHERS” (
A
page 39) for determining
the “AV COMPULINK MODE” setting.
• Also refer to the manual of the TV to be connected
to the DVD player.
• Connect the video 3 (DVD) input terminal on the
TV.
• If the video 3 input terminal is used for the
playback of a digital video movie, this terminal
does not work with the AV COMPU LINK
function.
1 Turn on the main power of the
TV.
2 Slide the remote control
mode selector to DVD.
3 Press 0 OPEN/CLOSE.
• The disc tray ejects.
4 Place a disc.
5 Press 3 (play) or DVD.
• The power of the TV is turned on.
• The input mode on the TV changes to either
the video 1 input or the video 3 (DVD) input.
Connection and setup
Input terminal on the TV
“AV COMPULINK MODE”
setting
Video 1 DVD2
Video 2 DVD1
JVC-manufactured TV
AV
COMPU LINK
II or III
Connection cord
(not supplied)
DVD player (rear panel)
Operation
Using the AV COMPU LINK function
EXA10[J_C_UJ]-07.fm Page 45 Tuesday, September 6, 2005 6:13 PM