Filter
Top Products
39
PICTURE
*
When using the supplied XV-EXA10, make sure that
“DIGITAL AUDIO OUTPUT” is set to “PCM ONLY”
.
PICTURE
Items Contents ( : initial setting)
MONITOR
TYPE
16 : 9:
For an ordinary wide TV.
:
For a TV with conventional 4:3 aspect ratio.
When a wide screen picture is input, the black
bars appear on the top and bottom of the
screen.
4 : 3 PS (Pan Scan):
For a TV with conventional 4:3 aspect ratio.
When a wide screen picture is input, the left
and right edges of the picture will not be
shown on the screen. (If the disc is not
compatible with Pan Scan, the picture will be
displayed at the Letterbox ratio.)
PICTURE
SOURCE
Select an item suitable to the video source.
:
The video source type (a video or film) is
automatically selected.
FILM:
To view a film or video recorded with the
progressive scan method.
VIDEO:
To view a normal video.
SCREEN
SAVER
Select the Screen Saver mode between /
OFF (Screen Saver activates when there is no
operation made for about 5 minutes since a
still picture was last displayed).
FILE TYPE Select an item suitable to the file type.
:
For MP3/WMA files.
STILL PICTURE:
For JPEG files.
VIDEO:
For ASF/DivX/MPEG1/MPEG2 files.
4 : 3 LB (Letterbox)
AUTO
ON
AUDIO
AUDIO
Items Contents ( : initial setting)
DIGITAL
AUDIO
OUTPUT*
Select the output signal type suitable to the
equipment connected to the DIGITAL OUT
terminal (a decoder-built-in amplifier or
other digital equipment with an optical
input terminal). Refer to “List of
relationships of DIGITAL AUDIO OUTPUT
preference items and output signal”
(A page 40).
:
Equipment corresponding only to linear PCM.
DOLBY DIGITAL/PCM:
Dolby digital decoder or equipment having the
same function.
STREAM/PCM:
DTS/Dolby digital decoder or equipment
having the same function.
DOWN MIX Select the signal suitable to the equipment
connected to the DIGITAL OUT terminal.
Set “DOWN MIX” only when “DIGITAL
AUDIO OUTPUT” is set to “PCM ONLY”.
DOLBY SURROUND:
Dolby Pro Logic decoder-built-in equipment.
:
Ordinary audio equipment.
D (Dynamic).
RANGE
COMPRESSION
To correct the difference between high
volume and low volume when playing back
with low volume (only for a DVD recorded
with Dolby digital).
:
The D. RANGE COMPRESSION function
automatically works.
ON:
The D. RANGE COMPRESSION function
always works.
OTHERS
Items Contents ( : initial setting)
RESUME Select /OFF. (A page 26)
ON SCREEN
GUIDE
Select /OFF. (A page 25)
AV
COMPULINK
MODE
When you want to control the supplied DVD
player and the connected TV or other
equipment at the same time, select a
setting according to the type of terminal on
the equipment connected to the DVD
player. (Refer to “Using the AV COMPU
LINK function” (A page 45).)
:
When the video 3 input terminal on the TV or
the DVD input terminal is connected.
DVD2:
When the video 1 input terminal on the TV is
connected.
DVD3:
When the video 2 input terminal on the TV is
connected.
DivX
REGISTRATION
The DVD player has its own registration
code. You can confirm the registration
code, when necessary. Once you have
played back a disc in which the registration
code is recorded, the registration code of
the DVD player is overwritten for copyright
protection.
PCM ONLY
STEREO
AUTO
ON
ON
DVD1
Changing the initial settings with the preference screen (continued)
EXA10[J_C_UJ]-05.fm Page 39 Wednesday, September 28, 2005 4:09 PM