JVC SP-EXA10 Cassette Player User Manual


 
34
Playing back DVDs/CDs
7 When a disc is played back or paused
1 Slide the remote control
mode selector to DVD.
2 Press VFP.
The current setting will appear on the TV
screen.
The “GAMMA” setting adjusts the
brightness of neutral tints while maintaining
the brightness of dark and bright portions.
The “SHARPNESS” setting adjusts the
screen sharpness.
3 Press 2/3 (cursor) to select
VFP mode.
Selecting “NORMAL” is suitable for normal
usage, and selecting “CINEMA” is suitable
for a dark room. When selecting “NORMAL”
or “CINEMA”, proceed to step 8.
Selecting “USER1” or “USER2” enables
you to make detailed adjustment in step 4
and the later steps.
4 Press5// (cursor) to select an
item to be adjusted.
5 Press ENTER.
6 Press 5// (cursor) to change
the value.
7 Press ENTER.
To adjust other items, go back to step 4.
8 Press VFP.
NOTE
If no operation is made for several seconds during
the procedure, the settings made so far will be
automatically stored.
“VFP” stands for “Video Fine Processor”.
There are some DVD AUDIOs with a special
group, called “bonus group”, recorded.
NOTE
You can use this function when “BONUS” lights up
in the display window on the DVD player.
7 When a disc is played back
1 Slide the remote control
mode selector to DVD.
2 Press GROUP/TITLE
repeatedly to select a bonus
group.
“KEY_ _ _ _” appears on the TV screen,
and in the display window on the
DVD
player
.
3 Press the number buttons to
enter the pin code (4 digits).
The method of obtaining a pin code differs
depending on the disc.
4 Press ENTER.
When the correct pin code is entered,
“BONUS” disappears and the playback of
the bonus group starts.
If an incorrect pin code is entered, try
entering the correct pin code again.
Adjusting the picture
quality (VFP)
GAMMA
TV screen
Example:
Playing back the bonus
group
For the locations of the remote
control buttons, refer to page 28.
EXA10[J_C_UJ]-05.fm Page 34 Tuesday, September 6, 2005 6:07 PM