Filter
Top Products
44
Timer
9 Press F AUDIO to turn off the
receiver.
• The playback timer is available only when
the receiver is off.
NOTE
• Complete the playback timer setting at least 1
minute prior to the starting time you have selected in
step 4.
• While setting the playback timer, you can return to
the previous step by pressing CANCEL or you can
stop the setting by pressing CLOCK/TIMER.
• When the playback starts, the volume gradually
increases to the selected level.
• You can make a variety of playback settings by
combining the playback timer and saving the
settings for program playback, random playback or
repeat playback. (
A
page 31)
Canceling the playback timer
Press CANCEL after following
steps 1 and 2 on page 43.
NOTE
• Even after you canceled the playback timer, the
setting remains stored.
Activating the playback timer again
After following steps 1 and 2 on
page 43, press ENTER. Then press
F AUDIO to turn off the receiver.
NOTE
• When the power cord of the receiver is
disconnected from the AC outlet or the power is
interrupted, the clock and the playback timer
settings may be lost. If the settings are lost, set the
clock and playback timer again.
Confirming the playback timer settings
Press SET repeatedly after
following steps 1, 2 and 3 on
page 43.
• To return to the normal display while confirming
the settings, press CLOCK/TIMER.
Changing the playback timer settings
Set the playback timer again from
step 1 on page 43.
This indicator lights up when the playback
timer is activated.
For the locations of the remote
control buttons, refer to page 42.
EXA10[J_C_UJ]-06.fm Page 44 Tuesday, September 6, 2005 6:06 PM